frodr Posted March 15, 2020 Share Posted March 15, 2020 Do I have to add anything in Unraid to Port forward a VM on virbr0? I guess I need a vlan capable router? Cheers, Frode Quote Link to comment
frodr Posted March 16, 2020 Author Share Posted March 16, 2020 Appreciate any hint and idea.... Thanks, Frode Quote Link to comment
itimpi Posted March 16, 2020 Share Posted March 16, 2020 I assume you are trying to get to the VM? Virbr0 is a NAT bridge so you cannot port forwarding through it (as far as I know). You want a bridge like br0 or br1 that directly connects to the LAN. Quote Link to comment
bonienl Posted March 17, 2020 Share Posted March 17, 2020 Virbr0 allows only outgoing connections initiated from the VM itself, it does not allow incoming connections initiated from outside the VM, e.g. your PC. You can enable bridge mode for your interface eth0 (see network settings) and use the corresponding br0 interface for your VM, as explained by @itimpi Quote Link to comment
frodr Posted March 17, 2020 Author Share Posted March 17, 2020 Thanks guys, much appreciated. Quote Link to comment
rutherford Posted April 1, 2020 Share Posted April 1, 2020 I'm having a similar issue, but I can't figure out how to get these steps done. My VM Settings (MacinaBox) > Network Bridge > br0 Found it. A basic misunderstanding of how VMs work: they get their own IPs. Got it sorted, up and running. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.