toolmanz Posted March 16, 2020 Share Posted March 16, 2020 (edited) All, Well I have been at this for well over a week and seem no closer to resolution. Objective is to configure PF Sense to allow traffic through from reverse proxy to specific unraid dockers. Local access works no problem. I can access all of my dockers locally. I use duckdns to provide my reverse proxy. Equipment: Dell R710 2U rackmount server Onboard 4 port NIC 23 HT’s and 46G memory Unraid server with various dockers such as Nextcloud, NZBGet, Sonarr and Bitwarden Server is stable and functioning as expected. PF Sense running on a VM using 2 of the 4 internal NIC's local http and https access to dockers is working. Needed: Set of rules and configurations to access from unraid dockers externally through reverse proxy at duckdns.org Can someone point me in the direction of a possible solution. I have tried a bunch of different methods to set up rules in PF Sense with no joy so far. PF Sense is blocking access. Very happy with PF Sense so far - except this. It is a deal breaker for me. Searched this and the PF Sense forum and have not found much. Thanks in advance... Cheers Edited March 17, 2020 by toolmanz solved Quote Link to comment
toolmanz Posted March 16, 2020 Author Share Posted March 16, 2020 I have posted both here and on PF Sense forums I hope general was the place to put this. Quote Link to comment
blaine07 Posted March 16, 2020 Share Posted March 16, 2020 Are you forwarding 80/443 in pfSense to reverse proxy on Unraid? Quote Link to comment
toolmanz Posted March 16, 2020 Author Share Posted March 16, 2020 Well I tried forwarding to the server at 192.168.1.140 .... is that what you mean? Quote Link to comment
blaine07 Posted March 16, 2020 Share Posted March 16, 2020 Well I tried forwarding to the server at 192.168.1.140 .... is that what you mean?Your using Letsencrypt on Unraid? What port do you have it watching on? My LE reverse proxy runs on 180/1443; so whatever ports your reverse proxy is watching is what you need to forward 80/443 from pfSense to; and yeah whatever IP of your Unraid box is. Quote Link to comment
DZMM Posted March 16, 2020 Share Posted March 16, 2020 I'm assuming you've setup dynamic dns in pfsense to update duckdns with your ip address for the domains and sub-domains you are using? Quote Link to comment
toolmanz Posted March 17, 2020 Author Share Posted March 17, 2020 All, Thanks to everyone who responded. Well as it turns out I had the configuration of the NAT rules correct. But, because I am on a fibre network, had to do some stuff with the modem and service. That is what was preventing me from having this work. The modem has to be bypassed because it has its own firewall etc. I am in Canada and use Bell Fibe. Bell uses their "3000" fibre modem. For anyone who wants to know, the information on the changes can be found at : www.dslreports.com The PF Sense is working correctly and I have external access to my server. 😊 Thanks all Cheers Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.