Hi

 

I tried following the Spaceivader 1 guide on dual boot windows. I have made all the changes in Win. I have changed the UUID. 

I have found the VirtIO drivers (I think) BUT my Samung 970 don´t show in VM template. 

I have enable ACS override in "both" and VFIO and I have added the ID under Flash drive. 

Alla IMMOU groups are separated except one

This

 

IOMMU group 15:[1022:1440] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0

[1022:1441] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1

[1022:1442] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2

[1022:1443] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3

[1022:1444] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4

[1022:1445] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5

[1022:1446] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6

[1022:1447] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7

 

IOMMU group 16:[144d:a808] 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983

 

As you can see my NVMe is in separate group. 

 

My sys linux looks like this. 

 

default menu.c32
menu title Lime Technology, Inc.
prompt 0
timeout 50
label Unraid OS
  menu default
  kernel /bzimage
  append pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot vfio-pci.ids=144d:a808,1022:149c,1022:1485
label Unraid OS GUI Mode
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 vfio-pci.ids=144d:a808,1022:149c,1022:1485
label Unraid OS Safe Mode (no plugins, no GUI)
  kernel /bzimage
  append initrd=/bzroot unraidsafemode
label Unraid OS GUI Safe Mode (no plugins)
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui unraidsafemode
label Memtest86+
  kernel /memtest

 

Is it suppose to be with in GUI and non GUI unraid? I have only installed the NON gui! 

Can someone please have a look so I get this right?

 

When I look I see the NVMe here swell as group 16

 

SCSI Devices

[0:0:0:0]disk SanDisk Ultra Fit 1.00 /dev/sda 15.3GB

[4:0:0:0]disk ATA Samsung SSD 860 2B6Q /dev/sdb 1.00TB

[10:0:0:0]disk ATA WDC WD4003FZEX-0 1A01 /dev/sdc 4.00TB

[N:0:4:1]disk Samsung SSD 970 EVO Plus 500GB__1 /dev/nvme0n1 500GB

Thanks

Edited March 17, 20206 yr by Micro553
more info

Your NVMe is not being stubbed otherwise it should show up in the Other PCI Devices section on the VM template and disappear from the SCSI Devices.

 

Move your vfio-pci.ids section to just after append.