Nwme don´t show in Vm template

[Micro553]

Hi

 

I tried following the Spaceivader 1 guide on dual boot windows. I have made all the changes in Win. I have changed the UUID. 

I have found the VirtIO drivers (I think) BUT my Samung 970 don´t show in VM template. 

I have enable ACS override in "both" and VFIO and I have added the ID under Flash drive. 

Alla IMMOU groups are separated except one

This

 

IOMMU group 15:[1022:1440] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0

[1022:1441] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1

[1022:1442] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2

[1022:1443] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3

[1022:1444] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4

[1022:1445] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5

[1022:1446] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6

[1022:1447] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7

 

IOMMU group 16:[144d:a808] 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983

 

As you can see my NVMe is in separate group. 

 

My sys linux looks like this. 

 

default menu.c32
menu title Lime Technology, Inc.
prompt 0
timeout 50
label Unraid OS
  menu default
  kernel /bzimage
  append pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot vfio-pci.ids=144d:a808,1022:149c,1022:1485
label Unraid OS GUI Mode
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 vfio-pci.ids=144d:a808,1022:149c,1022:1485
label Unraid OS Safe Mode (no plugins, no GUI)
  kernel /bzimage
  append initrd=/bzroot unraidsafemode
label Unraid OS GUI Safe Mode (no plugins)
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui unraidsafemode
label Memtest86+
  kernel /memtest

 

Is it suppose to be with in GUI and non GUI unraid? I have only installed the NON gui! 

Can someone please have a look so I get this right?

 

When I look I see the NVMe here swell as group 16

 

SCSI Devices

[0:0:0:0]disk SanDisk Ultra Fit 1.00 /dev/sda 15.3GB

[4:0:0:0]disk ATA Samsung SSD 860 2B6Q /dev/sdb 1.00TB

[10:0:0:0]disk ATA WDC WD4003FZEX-0 1A01 /dev/sdc 4.00TB

[N:0:4:1]disk Samsung SSD 970 EVO Plus 500GB__1 /dev/nvme0n1 500GB

Thanks

Edited March 17, 2020 by Micro553
more info

[testdasi]

Your NVMe is not being stubbed otherwise it should show up in the Other PCI Devices section on the VM template and disappear from the SCSI Devices.

 

Move your vfio-pci.ids section to just after append.