audias Posted March 23, 2020 Share Posted March 23, 2020 Hi, i need help with this, when i start VM with gpu pass, i got this error internal error: qemu unexpectedly closed the monitor: 2020-03-23T08:33:17.003726Z qemu-system-x86_64: -device vfio-pci,host=0000:24:00.0,id=hostdev0,bus=pci.0,addr=0x5: vfio 0000:24:00.0: group 28 is not viable Please ensure all devices within the iommu_group are bound to their vfio bus driver. not sure what was the problem PCI Devices and IOMMU Groups: IOMMU group 0: [1022:1482] 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 1: [1022:1483] 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge IOMMU group 2: [1022:1483] 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge IOMMU group 3: [1022:1482] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 4: [1022:1482] 00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 5: [1022:1483] 00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse GPP Bridge IOMMU group 6: [1022:1482] 00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 7: [1022:1482] 00:05.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 8: [1022:1482] 00:07.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 9: [1022:1484] 00:07.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] IOMMU group 10: [1022:1482] 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Host Bridge IOMMU group 11: [1022:1484] 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] IOMMU group 12: [1022:1484] 00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] IOMMU group 13: [1022:1484] 00:08.3 PCI bridge: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Internal PCIe GPP Bridge 0 to bus[E:B] IOMMU group 14: [1022:790b] 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 61) [1022:790e] 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51) IOMMU group 15: [1022:1440] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 0 [1022:1441] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 1 [1022:1442] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 2 [1022:1443] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 3 [1022:1444] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 4 [1022:1445] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 5 [1022:1446] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 6 [1022:1447] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Matisse Device 24: Function 7 IOMMU group 16: [1cc1:8201] 01:00.0 Non-Volatile memory controller: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive (rev 03) IOMMU group 17: [1022:57ad] 20:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57ad IOMMU group 18: [1022:57a3] 21:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a3 IOMMU group 19: [1022:57a3] 21:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a3 IOMMU group 20: [1022:57a3] 21:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a3 IOMMU group 21: [1022:57a3] 21:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a3 IOMMU group 22: [1022:57a3] 21:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a3 IOMMU group 23: [1022:57a4] 21:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a4 [1022:1485] 2a:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP [1022:149c] 2a:00.1 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller [1022:149c] 2a:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller IOMMU group 24: [1022:57a4] 21:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a4 [1022:7901] 2b:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) IOMMU group 25: [1022:57a4] 21:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 57a4 [1022:7901] 2c:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) IOMMU group 26: [1cc1:8201] 22:00.0 Non-Volatile memory controller: ADATA Technology Co., Ltd. XPG SX8200 Pro PCIe Gen3x4 M.2 2280 Solid State Drive (rev 03) IOMMU group 27: [1b21:0612] 23:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) IOMMU group 28: [10de:1e84] 24:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1) [10de:10f8] 24:00.1 Audio device: NVIDIA Corporation Device 10f8 (rev a1) [10de:1ad8] 24:00.2 USB controller: NVIDIA Corporation TU104 USB 3.1 Host Controller (rev a1) [10de:1ad9] 24:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1) IOMMU group 29: [8086:1539] 26:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03) IOMMU group 30: [8086:2723] 28:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a) IOMMU group 31: [10de:0a65] 2d:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) [10de:0be3] 2d:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) IOMMU group 32: [1022:148a] 2e:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse PCIe Dummy Function IOMMU group 33: [1022:1485] 2f:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP IOMMU group 34: [1022:149c] 2f:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller IOMMU group 35: [1022:1487] 2f:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller IOMMU group 36: [1022:7901] 30:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) IOMMU group 37: [1022:7901] 31:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51) and XML: <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10</name> <uuid>6b58d56f-6f99-d990-13c0-5b26501a8cf3</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='14'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='16'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='18'/> <vcpupin vcpu='8' cpuset='8'/> <vcpupin vcpu='9' cpuset='20'/> <vcpupin vcpu='10' cpuset='10'/> <vcpupin vcpu='11' cpuset='22'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-4.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/6b58d56f-6f99-d990-13c0-5b26501a8cf3_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='12' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:b7:e7:b9'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2f' slot='0x00' function='0x4'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc336'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc539'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <memballoon model='none'/> </devices> </domain> appreciate any help, Thankyou! Quote Link to comment
bastl Posted March 23, 2020 Share Posted March 23, 2020 2 hours ago, audias said: group 28 is not viable Please ensure all devices within the iommu_group are bound to their vfio bus driver You have to bind and passthrough ALL devices in that group, not only the GPU itself. The other devices are part of your GPU. 2 hours ago, audias said: IOMMU group 28: [10de:1e84] 24:00.0 VGA compatible controller: NVIDIA Corporation TU104 [GeForce RTX 2070 SUPER] (rev a1) [10de:10f8] 24:00.1 Audio device: NVIDIA Corporation Device 10f8 (rev a1) [10de:1ad8] 24:00.2 USB controller: NVIDIA Corporation TU104 USB 3.1 Host Controller (rev a1) [10de:1ad9] 24:00.3 Serial bus controller [0c80]: NVIDIA Corporation TU104 USB Type-C UCSI Controller (rev a1) 1 Quote Link to comment
testdasi Posted March 23, 2020 Share Posted March 23, 2020 You MUST pass through all 4 devices together. They are all part of your RTX 2070. Easiest way to bind devices is to install the VFIO-PCI Config plugin from the app store then Settings -> VFIO-PCI.CFG -> tick the 4 devices in group 28 -> click Build VFIO-PCI.CFG -> reboot Note 1: if you add / remove PCIe device, make sure you disable the vfio-pci.cfg first because the pci bus would change. Then 24:00.0 is in GPU, 24:00.1 is in sound card (audio device), 24:00.2/3 is in Other PCI device section of the VM template. You are likely also to need to dump your vbios and/or boot Unraid with the "Geforce 210". Watch SpaceInvade One tutorial for more details on dumping vbios. Note 2: given you have 2 GPU, do not download from Techpower Up but dump your own instead. 1 Quote Link to comment
audias Posted March 23, 2020 Author Share Posted March 23, 2020 10 minutes ago, testdasi said: You MUST pass through all 4 devices together. They are all part of your RTX 2070. Easiest way to bind devices is to install the VFIO-PCI Config plugin from the app store then Settings -> VFIO-PCI.CFG -> tick the 4 devices in group 28 -> click Build VFIO-PCI.CFG -> reboot Note 1: if you add / remove PCIe device, make sure you disable the vfio-pci.cfg first because the pci bus would change. Then 24:00.0 is in GPU, 24:00.1 is in sound card (audio device), 24:00.2/3 is in Other PCI device section of the VM template. You are likely also to need to dump your vbios and/or boot Unraid with the "Geforce 210". Watch SpaceInvade One tutorial for more details on dumping vbios. Note 2: given you have 2 GPU, do not download from Techpower Up but dump your own instead. oke will try the VFIO-PCI, i already boot with the "Gefore 210" how do i know that i need to dump my vbios? Thankyou btw Quote Link to comment
testdasi Posted March 23, 2020 Share Posted March 23, 2020 15 minutes ago, audias said: oke will try the VFIO-PCI, i already boot with the "Gefore 210" how do i know that i need to dump my vbios? Thankyou btw If you can pass through RTX 2070 after binding and without vbios then you don't need it. But it's still recommended to dump and use your own vbios because it helps with stability. Just from experience, the RTX 2070 usually needs a vbios though. Watch SpaceInvade One tutorial on Youtube for more details on dumping vbios. 1 Quote Link to comment
audias Posted March 23, 2020 Author Share Posted March 23, 2020 1 hour ago, testdasi said: You MUST pass through all 4 devices together. They are all part of your RTX 2070. Easiest way to bind devices is to install the VFIO-PCI Config plugin from the app store then Settings -> VFIO-PCI.CFG -> tick the 4 devices in group 28 -> click Build VFIO-PCI.CFG -> reboot Note 1: if you add / remove PCIe device, make sure you disable the vfio-pci.cfg first because the pci bus would change. Then 24:00.0 is in GPU, 24:00.1 is in sound card (audio device), 24:00.2/3 is in Other PCI device section of the VM template. You are likely also to need to dump your vbios and/or boot Unraid with the "Geforce 210". Watch SpaceInvade One tutorial for more details on dumping vbios. Note 2: given you have 2 GPU, do not download from Techpower Up but dump your own instead. "Easiest way to bind devices is to install the VFIO-PCI Config plugin from the app store then Settings -> VFIO-PCI.CFG -> tick the 4 devices in group 28 -> click Build VFIO-PCI.CFG -> reboot Note 1: if you add / remove PCIe device, make sure you disable the vfio-pci.cfg first because the pci bus would change." i tried this and reboot, then setup the vm again, then when i try to start the VM, then my unraid is freeze not responsive, (the web gui or terminal directly) Quote Link to comment
testdasi Posted March 23, 2020 Share Posted March 23, 2020 11 minutes ago, audias said: "Easiest way to bind devices is to install the VFIO-PCI Config plugin from the app store then Settings -> VFIO-PCI.CFG -> tick the 4 devices in group 28 -> click Build VFIO-PCI.CFG -> reboot Note 1: if you add / remove PCIe device, make sure you disable the vfio-pci.cfg first because the pci bus would change." i tried this and reboot, then setup the vm again, then when i try to start the VM, then my unraid is freeze not responsive, (the web gui or terminal directly) copy paste your new xml. 1 Quote Link to comment
audias Posted March 24, 2020 Author Share Posted March 24, 2020 <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10</name> <uuid>1ee9bb8d-0c00-3e32-97f0-4f92781514f2</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='14'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='16'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='18'/> <vcpupin vcpu='8' cpuset='8'/> <vcpupin vcpu='9' cpuset='20'/> <vcpupin vcpu='10' cpuset='10'/> <vcpupin vcpu='11' cpuset='22'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-4.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/1ee9bb8d-0c00-3e32-97f0-4f92781514f2_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='12' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:ad:47:1e'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2f' slot='0x00' function='0x4'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x2'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc336'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc539'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <memballoon model='none'/> </devices> </domain> 14 hours ago, testdasi said: copy paste your new xml. here the new XML. Quote Link to comment
testdasi Posted March 24, 2020 Share Posted March 24, 2020 4 hours ago, audias said: here the new XML. You selected 2f:00.4 which is the onboard audio instead of 24:00.1 (the 2070 HDMI Audio). As I said, you need to pass through all 4 devices to stand a fighting chance to pass through the 2070. Also, you need to be less ambitious for now. Let's try to get the 2070 to work first and then work on the onboard audio. Basically one device at a time. Try this new xml. I still think you'll need the vbios for it to work but keep our fingers crossed. Beside changing the device, I also changed your hyper v vendor_id tag to give it a 12-character dummy value. I found this to work better than none with regards to error code 43. <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10</name> <uuid>1ee9bb8d-0c00-3e32-97f0-4f92781514f2</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='14'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='16'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='18'/> <vcpupin vcpu='8' cpuset='8'/> <vcpupin vcpu='9' cpuset='20'/> <vcpupin vcpu='10' cpuset='10'/> <vcpupin vcpu='11' cpuset='22'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-4.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/1ee9bb8d-0c00-3e32-97f0-4f92781514f2_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='0123456789ab'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='12' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/Windows 10/vdisk1.img'/> <target dev='hdc' bus='virtio'/> <boot order='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:ad:47:1e'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x2'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc336'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x046d'/> <product id='0xc539'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <memballoon model='none'/> </devices> </domain> 1 Quote Link to comment
audias Posted March 24, 2020 Author Share Posted March 24, 2020 4 hours ago, testdasi said: Also, you need to be less ambitious for now. Let's try to get the 2070 to work first and then work on the onboard audio. Basically one device at a time. wwoooowww its working now, im installin windows rightnow thankyou verymuch! so if i want to passthrough onboard audio, should i pass both audio? btw is this the video you mention? Quote Link to comment
testdasi Posted March 24, 2020 Share Posted March 24, 2020 26 minutes ago, audias said: wwoooowww its working now, im installin windows rightnow thankyou verymuch! so if i want to passthrough onboard audio, should i pass both audio? No prob. Once you installed Windows then install the Nvidia driver (download from their website) + untick Geforce Experience component of the driver if you don't need it. Once the Nvidia driver has been installed, reboot your VM, make sure the GPU still works after reboot then shut the VM down. Then go to the Unraid GUI (through the network - you can even use your phone if there's no PC around) to start the VM again and then make sure the GPU still works. Then reboot the whole server, then start the VM (again make sure the GPU still works). If it still works after all the above steps then congrats, you just managed to pass through the RTX 2070. Then take that working xml and save it somewhere safe (in case you need to return to it in the future). Only then should you start working on passing through the onboard audio (together with the 2070 HDMI Audio). (remember that regardless whether you pass through the onboard audio or not, the 2070 HDMI Audio MUST always be passed through together with the GPU). 1 Quote Link to comment
audias Posted March 24, 2020 Author Share Posted March 24, 2020 (edited) 1 hour ago, testdasi said: No prob. Once you installed Windows then install the Nvidia driver (download from their website) + untick Geforce Experience component of the driver if you don't need it. Once the Nvidia driver has been installed, reboot your VM, make sure the GPU still works after reboot then shut the VM down. Then go to the Unraid GUI (through the network - you can even use your phone if there's no PC around) to start the VM again and then make sure the GPU still works. Then reboot the whole server, then start the VM (again make sure the GPU still works). If it still works after all the above steps then congrats, you just managed to pass through the RTX 2070. Then take that working xml and save it somewhere safe (in case you need to return to it in the future). Only then should you start working on passing through the onboard audio (together with the 2070 HDMI Audio). (remember that regardless whether you pass through the onboard audio or not, the 2070 HDMI Audio MUST always be passed through together with the GPU). after all working i found out that i can passthrough nvme ssd, so i passthrough that and install windows on that, now when i try pass onboard audio the symptom was like when i pass GPU wrong, the whole system was freeze IOMMU group 35: [1022:1487] 2f:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller < this is the onboard audio i pass, here are the update xml <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm'> <name>Windows 10 ssd</name> <uuid>fc59c1a9-85a6-de16-aaba-00d8619e7777</uuid> <metadata> <vmtemplate xmlns="unraid" name="Windows 10" icon="windows.png" os="windows10"/> </metadata> <memory unit='KiB'>16777216</memory> <currentMemory unit='KiB'>16777216</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>12</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='12'/> <vcpupin vcpu='2' cpuset='2'/> <vcpupin vcpu='3' cpuset='14'/> <vcpupin vcpu='4' cpuset='4'/> <vcpupin vcpu='5' cpuset='16'/> <vcpupin vcpu='6' cpuset='6'/> <vcpupin vcpu='7' cpuset='18'/> <vcpupin vcpu='8' cpuset='8'/> <vcpupin vcpu='9' cpuset='20'/> <vcpupin vcpu='10' cpuset='10'/> <vcpupin vcpu='11' cpuset='22'/> </cputune> <os> <type arch='x86_64' machine='pc-i440fx-4.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/fc59c1a9-85a6-de16-aaba-00d8619e7777_VARS-pure-efi.fd</nvram> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <hyperv> <relaxed state='on'/> <vapic state='on'/> <spinlocks state='on' retries='8191'/> <vendor_id state='on' value='none'/> </hyperv> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='12' threads='1'/> </cpu> <clock offset='localtime'> <timer name='hypervclock' present='yes'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/mnt/user/isos/virtio-win-0.1.160-1.iso'/> <target dev='hdb' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='1'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='pci' index='0' model='pci-root'/> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:b9:a7:3f'/> <source bridge='br0'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x0'/> </source> <rom file='/mnt/user/asmarandana/rtx2070.ROM'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2f' slot='0x00' function='0x4'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x22' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x2'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x24' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2a' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x0c' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2a' slot='0x00' function='0x1'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x0d' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x2a' slot='0x00' function='0x3'/> </source> <address type='pci' domain='0x0000' bus='0x00' slot='0x0e' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> </domain> Edited March 24, 2020 by audias Quote Link to comment
testdasi Posted March 24, 2020 Share Posted March 24, 2020 You added a rom file (vbios). Was it there last time you successfully passed through the GPU? You also added 2a:00 which is the USB device. Were you able to succesfully pass it through before adding the on-board sound card? 1 Quote Link to comment
audias Posted March 24, 2020 Author Share Posted March 24, 2020 2 minutes ago, testdasi said: You added a rom file (vbios). Was it there last time you successfully passed through the GPU? You also added 2a:00 which is the USB device. Were you able to succesfully pass it through before adding the on-board sound card? yes, without passing the on-board sound card, im able to start the vm.. but with the sound card, the system is freeze Quote Link to comment
testdasi Posted March 24, 2020 Share Posted March 24, 2020 11 minutes ago, audias said: yes, without passing the on-board sound card, im able to start the vm.. but with the sound card, the system is freeze Then it looks like it unfortunately can't be passed through then. 1 Quote Link to comment
audias Posted March 24, 2020 Author Share Posted March 24, 2020 14 minutes ago, testdasi said: Then it looks like it unfortunately can't be passed through then. aahhh too bad... well i guess this is enough success for me.. thankyou for guidance! i guess just need to buy pci sound card or usb sound card Quote Link to comment
testdasi Posted March 24, 2020 Share Posted March 24, 2020 2 hours ago, audias said: i guess just need to buy pci sound card or usb sound card Assuming your onboard USB is passed through and working fine, get a USB sound card. It has been quite some time since an internal sound card is worth it. USB is just much easier to use while offering comparable if not better sound quality. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.