March 25, 20206 yr Server just rebooted for no reason. I ran diagnostics with mce installed. See attached. unraid-diagnostics-20200325-1532.zip
March 26, 20206 yr Author Sorry for the late reply are there memory errors? Using ecc ram at stock settings. Also didn't start to have issues until I added a few drives and started the parity check Edited March 26, 20206 yr by ap90033
March 26, 20206 yr Community Expert 10 hours ago, ap90033 said: are there memory errors? Using ecc ram at stock settings probably not. Just an easy thing to try but pointless with ecc Are you sure you didn't have a power problem that caused reboot? Do you have an UPS? Setup Syslog Server so you can retrieve syslog from before reboot next time.
March 26, 20206 yr Author I think the issue is, I have a Corsair 850 watt gold power supply that was set to multp. rails, I switched to single rail. Trying to run 18 sata drives but it has only 16 connectors. I have purchased https://www.amazon.com/gp/product/B0086OGN9E/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 to add more but am unsure this will work
March 29, 20206 yr Author Still have issues I'm running a total of 16 nas drives and 3 fans. Ryzen 3900x w 32 gigs ecc ram, gtx1080 and 8 port sas to sata card. Mboard is as rock phantom 4. Hx850 gold power supply. Having issues getting everything working. Do I have enough power supply? SI-PEX40137 is model of sas card
Archived
This topic is now archived and is closed to further replies.