Mr. Traxson Posted March 27, 2020 Share Posted March 27, 2020 (backstory/context) I currently have 32tb of usable storage in my server and only 1, 500gb M.2 for cache. so i wanted to double my cache so i added a second 500gb M.2 to my server. It auto registered in raid 1 so i found space invaders video about how to run them in raid 0 and i ran that command to change it. but when i did it registered as 1.5Tb instead of 1Tb. I thought it was some weird glitch or bug and i poked about for a bit trying to fix it but i eventually just left it. well fast forward a month or so and my server is starting to frequently crash on me. i consulted unriad discord ran by Byte my Bits and a member suggested taking out the second cache drive and trying to so whats going on. so i removed the cache drive and when i booted the server back up all my dockers were gone and it required me to reformat my original cache drive for some reason. so i went to community applications to reinstall the docker images and now i can't get anything to install. it keeps sending me an error. I again consulted the same discord and they had me try a bunch of stuff like turning the docker off and on and deleting the current docker image and stuff. we weren't able to fix it so I'm really hoping someone here knows whats going on. Quote Link to comment
trurl Posted March 27, 2020 Share Posted March 27, 2020 Go to Tools-diagnostics and attach the complete Diagnostics zip file to your NEXT post Quote Link to comment
Mr. Traxson Posted March 27, 2020 Author Share Posted March 27, 2020 okay here is the diagnostic zip file veronica-diagnostics-20200326-2047.zip Quote Link to comment
Squid Posted March 27, 2020 Share Posted March 27, 2020 As a start, I would assign a static IP address to your server and DNS addresses of 208.67.222.222 and 208.67.220.220 and also fill out the gate way with the address of your router and then see if that makes any difference. Quote Link to comment
Mr. Traxson Posted March 27, 2020 Author Share Posted March 27, 2020 14 hours ago, Squid said: As a start, I would assign a static IP address to your server and DNS addresses of 208.67.222.222 and 208.67.220.220 and also fill out the gate way with the address of your router and then see if that makes any difference. okay, im guessing that can be done in the network settings? Quote Link to comment
trurl Posted March 27, 2020 Share Posted March 27, 2020 1 hour ago, Mr. Traxson said: okay, im guessing that can be done in the network settings? Take a look Quote Link to comment
shalarice Posted March 29, 2020 Share Posted March 29, 2020 @Mr. Traxson Just in case you could not find the answer. You can indeed use the gui under Settings ---> Network: There you can find the IP settings such as the address, netmask, gateway, dns server. Take note that you need to stop the VM and Docker Service before doing so. It might also be useful to know that you need to make sure that you change the IP for the right interface if you have more than one nic in your system. Alternatively you could change these settings via ssh. https://www.freebsd.org/doc/handbook/config-network-setup.html Hope that helps a bit more than "take a look" regards Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.