Wolfie123 Posted March 29, 2020 Share Posted March 29, 2020 Hi All, I'm recently having issues where I cannot reboot from the interface and instead am having to forcibly reboot the system. Previously I thought there was a stuck docker process but on my latest attempt, all docker images where shutdown and vm's stopped. I have attached the diagnostic. Any help would be greatly received. Thanks Wolfie123 unraid-diagnostics-20200329-1849.zip Quote Link to comment
JorgeB Posted March 30, 2020 Share Posted March 30, 2020 Diags are after rebooting, if a clean shutdown is failing Unraid should save the diags on the flash drive, post those instead. Quote Link to comment
Wolfie123 Posted March 31, 2020 Author Share Posted March 31, 2020 Which files from the USB do you need? Thanks Quote Link to comment
JorgeB Posted March 31, 2020 Share Posted March 31, 2020 Diags are save to the logs folder on the flash drive. Quote Link to comment
itimpi Posted March 31, 2020 Share Posted March 31, 2020 1 hour ago, Wolfie123 said: Which files from the USB do you need? Thanks The complete diagnostics.zip file is always a good start Quote Link to comment
Wolfie123 Posted April 1, 2020 Author Share Posted April 1, 2020 Hey, I have attached the diags from the flashunraid-diagnostics-20200327-1214.zip unraid-diagnostics-20200327-1214.zip unraid-diagnostics-20200328-0928.zip unraid-diagnostics-20200329-1857.zip Quote Link to comment
JorgeB Posted April 2, 2020 Share Posted April 2, 2020 There are a lot of active PIDs open when you try to reboot, mostly from Plex, stop all dockers and see if you can reboot normally, if yes enable them one by one until you find the culprit. Quote Link to comment
Wolfie123 Posted April 7, 2020 Author Share Posted April 7, 2020 Hi, I have tried shutting all the dockers down first and that still resulted in a unclean restart. One of those logs should be from one of those attempts. Quote Link to comment
JorgeB Posted April 7, 2020 Share Posted April 7, 2020 I meant stop all dockers before starting the array, then reboot, if it reboots normally then enable dockers one by one. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.