Tophicles Posted April 2, 2020 Share Posted April 2, 2020 So, I had a disk go read-only (not marked off line and no errors in the log). Took the array into Maintenance Mode three days ago, ran the resierfsck -- check and it told me to rebuild the tree. So I did, it ran (took forever) and then it finished "Flushing finished.... Syncing finished... " Since then it's been sitting at that window, not "Completed" (ie, no prompt, still running) and the dashboard shows the disk being written to (along with parity) for the last two days. Le ugh. Do I just let it limp along? Diagnostics attached. angband-diagnostics-20200401-2323.zip Quote Link to comment
Tophicles Posted April 2, 2020 Author Share Posted April 2, 2020 Just for completeness, a shot of the entire array being read... Quote Link to comment
JorgeB Posted April 2, 2020 Share Posted April 2, 2020 5 hours ago, Tophicles said: for the last two days. That's a long time, doubt it will finish if it hasn't yet. Other disks being read is normal since you have turbo write enable. Quote Link to comment
Tophicles Posted April 2, 2020 Author Share Posted April 2, 2020 Thanks for the reply.... it eventually DID finish, just took 3.5 days... I think I'll replace the disk? I dunno.... very weird. Quote Link to comment
JorgeB Posted April 2, 2020 Share Posted April 2, 2020 For some reason there's no SMART report for disk7. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.