I followed the "Setting up WireGuard on Unraid" guide from back in December.  When I was finished and tested everything works except I cannot access external traffic once connected to the vpn.  I can access my Unraid server, Local LAN but if I try to access the web I have no internet/external traffic. 

 

What did I miss?  I appreciate the help.

 

Thank you  

Please use one of the existing Wireguard threads. e.g.:

 

Will do.  Thank you.

well, preferably the thread that is dedicated to the blog post, since you aren't following the quickstart guide:

 

But since you've asked the question in the quickstart guide thread I don't want to keep bouncing you around  Maybe read the quickstart guide itself to see if it helps?

Edited April 8, 20206 yr by ljm42

I replied to the thread dedicated to the blog post and haven't received a reply.  That was over a week ago, it's not a big rush but I will take a look at the quick start guide.  I appreciate your help.

I figured this out!  After reading through the quick start guide I quickly realized the changes that I needed to make.  Thank you!

Glad to hear it! Mind letting me know what the issue was? 

He didn't answer, but I had the same issue this morning.  Basically my problem was that in the wireguard config I set my local tunnel address to the router gateway rather than my Unraid server.  Setting it to the server sorts it!

On 5/3/2020 at 7:50 PM, Vannie said:

He didn't answer, but I had the same issue this morning.  Basically my problem was that in the wireguard config I set my local tunnel address to the router gateway rather than my Unraid server.  Setting it to the server sorts it!

I changed this to my unraid IP and fireguard throws an error - DNS resolution failure

Edited September 11, 20205 yr by Marcjwebb