jonfive Posted April 12, 2020 Share Posted April 12, 2020 I followed Spaceinvader's tutorial on using an nvme device - it works on first boot. When i shut down then turn the VM back on the whole system hangs and i have to hard reset. I tried switching unsafe interrupts back and forth, both lead to the same issue. **Without adjusting any of my text above in case i'm just going crazy - It seems like it added the second address on it's own with slot=0x08 - I'm sure i didn't add it since i copied the blank host dev directly and just changed the bus to 3. <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x00' slot='0x00' function='0x0'/> </source> </hostdev> Could i possibly solve this whole situation by changing the SECOND address bus to 3 as well? remove it? I just don't really want to have any more unsafe shutdowns and lose my data again.. thanks folks tower-diagnostics-20200411-2044.zip Quote Link to comment
WexfordStyle Posted May 25, 2020 Share Posted May 25, 2020 On 4/11/2020 at 8:56 PM, jonfive said: I followed Spaceinvader's tutorial on using an nvme device - it works on first boot. When i shut down then turn the VM back on the whole system hangs and i have to hard reset. I tried switching unsafe interrupts back and forth, both lead to the same issue. **Without adjusting any of my text above in case i'm just going crazy - It seems like it added the second address on it's own with slot=0x08 - I'm sure i didn't add it since i copied the blank host dev directly and just changed the bus to 3. <hostdev mode='subsystem' type='pci' managed='yes'> <source> <address domain='0x0000' bus='0x00' slot='0x00' function='0x0'/> </source> </hostdev> Could i possibly solve this whole situation by changing the SECOND address bus to 3 as well? remove it? I just don't really want to have any more unsafe shutdowns and lose my data again.. thanks folks tower-diagnostics-20200411-2044.zip Did you ever find a solution for this? I am having a similar issue. Quote Link to comment
light2089 Posted October 16, 2020 Share Posted October 16, 2020 (edited) I am facing the same issue. I recently upgraded from H470 to Z490, and not sure if it is a motherboard issue, but I cannot even install Windows anymore to the NVME drive. The entire system just freezes! Other OS (Ubuntu) and installing Windows in the array/cache works fine. Edited October 16, 2020 by light2089 Quote Link to comment
clay_statue Posted November 17, 2020 Share Posted November 17, 2020 Don't you hate when you finally find the thread with your exact issue and it just ends without a solution? I have a Windows 10 VM with GPU passthrough that shuts down cleanly no problem. However the Windows 10 VM that has GPU passthrough AND nvme passthrough crashes unraid. I can still do a graceful powerdown from the command line, because despite running headless unraid still accepts keyboard input so type "root / password / powerdown" will shutdown the system without having to do a hard reset. However it would be nice to figure out what about nvme passthrough is causing it to crash unraid when you shutdown the VM. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.