New to unraid or any similar, I made it as far as having a parity disk and a disk1. Now I'm trying to transfer my data from normal SSD to my disk1 (unraid). In MAIN I can see and mount my SSD but when I move to Kruseder to make the transfer I can't find SSD.

-SSD is inside my case connected thru sata

-Same issue with 2 more HDD that I'm trying to clean.

-Tried with unBalance I see only the unraid disk1

- Have the plug in unassigned devices and the plus

 

Any help will be appreciated...

 

Edited June 16, 20206 yr by MacRaid

You probably don't have a mapping added for the unassigned device in the template.  You have to map something like /UNASSIGNED to /mnt/disks

And make sure that mapping is read/write slave.

Thanks for the quick response, I'm not even sure how am I supposed to "map". Should I be doing that at command line?

Click on your Krusader docker icon and select Edit. You would add another path.

So, what I did was reinstall Krusader (not the binhex Kruseder) and then my drives appear as unraid_unassigned_disks. Thanks guys for sure I'll be back.

Quote

On 4/13/2020 at 1:59 PM, Squid said:

You probably don't have a mapping added for the unassigned device in the template.  You have to map something like /UNASSIGNED to /mnt/disks

 

On 4/13/2020 at 2:39 PM, trurl said:

And make sure that mapping is read/write slave.

 

 

This worked like a charm for me to allow me to connect to remote shares - edited the Binhex-Krusader container to add a new "path" called /REMOTES on the container and located at  /mnt/remotes/ on Unraid (Host Path) and now I could see and interact with the remote shares...

 

Thanks!  Jon