Johannes1234934 Posted April 16, 2020 Share Posted April 16, 2020 Hello community, I configured a 802.3ad (with two Interfaces, ETH1+ETH2) between my unRAID Server and my Firewall (Fortigate). First everything worked as it should. I enabled bonding and bridging. I added VLANs, configured a DHCP on my firewall (for some VLANs) and the Link was constant up. But when I restart the unRAID Server, the Link doesn't come up again. Then I have to start unRAID in Safe mode with GUI, go to Network Settings, and then I have to unselect ETH1 in the bonding, and reselect it again, then press apply and then the Link is up again. I have to do this procedure after every reboot. Can you please help me? Regards Johannes Quote Link to comment
bonienl Posted April 17, 2020 Share Posted April 17, 2020 Your description says you have bonded interfaces eth1 and eth2. This should be bond1. In order to have bond1 survive a reboot, you'll need to configue eth0 also as a bonded interface, with a single member (eth0). Can you please provide diagnostics, so we can have a better understanding of how your network configuration is done. Quote Link to comment
Johannes1234934 Posted April 17, 2020 Author Share Posted April 17, 2020 Hello craftsman, Thanks 4 your feedback! I will check this out, enable bonding on ETH0 and then I will give feedback here Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.