jcreynoldsii Posted April 17, 2020 Share Posted April 17, 2020 unRaid 6.8.3 Fix Common Problems is reporting the following warning: Your CPU is running constantly at 100% and will not throttle down when it's idle (to save heat / power). This is because there is currently no CPU Scaling Driver Installed. Seek assistance on the unRaid forums with this issue. Whats the proper corrective action for this? Attached is the sys log. homeserver-syslog-20200417-1314.zip Quote Link to comment
testdasi Posted April 17, 2020 Share Posted April 17, 2020 Install the Tips and Tweaks plugin which should allow you to change the scaling profile. Pick On Demand. Also check your BIOS and enable things like Intel Speedstep / AMD Cool & Quiet or stuff like that. Quote Link to comment
jcreynoldsii Posted April 17, 2020 Author Share Posted April 17, 2020 4 minutes ago, testdasi said: Install the Tips and Tweaks plugin which should allow you to change the scaling profile. Pick On Demand. Also check your BIOS and enable things like Intel Speedstep / AMD Cool & Quiet or stuff like that. Ill double check BIOS, here is what Tips and Tweaks shows about it: CPU Frequency Scaling Driver: * no driver * Governor: Quote Link to comment
jcreynoldsii Posted April 17, 2020 Author Share Posted April 17, 2020 Cool'n'Quiet was set to always disabled inside of BIOS. Tips and Tweaks now shows: CPU Frequency Scaling Driver: ACPI CPU Freq Governor: On Demand Fix Common Problems doesn't throw the warning any longer. Thanks for the suggestions. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.