No IP address after CPU replacement


Recommended Posts

So I upgraded my CPU and after first boot I see my server has no IPv4 address. Looked at some old threads and deleted my network.cfg, it reboots I get an IP all fine. If I then reboot the system it once again is unable to set an IP. 

 

I have attached my diags if anyone can assist? Never had this issue before can't see why upgrading the CPU would cause this issue, I did notice my BIOS time was 1 hour behind updated that yet issue still occurs. 

 

Thanks

unraid-diagnostics-20200422-1428.zip

Link to comment

Replaced Flash disk just in case. Boots fine after I deleted network.cfg, rebooted and it stays. IP assigned from DHCP then I turn off Bonding and it drops I can no longer contact server. 

 

I restart Network service via IPMI, can get back on box. What I have noticed now is both my eth0 and eth1 have the same MAC Address? See below, last image is what my MAC should be for IPMI nic.

 

image.thumb.png.26b774b238e573fd38ce68e423d1010e.png

 

image.thumb.png.669e9b65fa2d44a63682db720589d304.png

 

image.thumb.png.76b138ba6a2d3973641a1a9900f151e7.png

 

 

Edited by witalit
Link to comment
2 hours ago, johnnie.black said:

Same users have issues getting a DHCP address with latest release, try setting a static address.

As easy as that.. :). Working fine now after a reboot, guess I can just keep it static anyways. Thanks to Squid and Johnnie for the help here. 

 

Has this been reported as a bug at all?

 

Cheers

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.