pepsidrinker916 Posted May 2, 2020 Share Posted May 2, 2020 Just wanted to get some feedback/advice on this issue I am seeing. When my unRaid server does a parity check I have two drives that "get hot". The drives seem to be fine from SMART. As far as the location of the drives. One of the drives is located in the bottom of the case (with three other drives), and the other is inside the case at the bottom. I have three 120MM fans in the front of the case, the bottom fan (which gives airflow to the bottom drives) is set to 75%, while the other two fans are PMW. I also have two 140MM fans at the top of the case. Thoughts ? Parity check finished (0 errors) Duration: 7 hours, 6 minutes, 22 seconds. Average speed: 117.3 MB/s Quote Link to comment
Squid Posted May 2, 2020 Share Posted May 2, 2020 Mid 40's aren't anything to really worry about. You can adjust the temperature thresholds within Settings - Disk Settings Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.