Kevinf63 Posted May 4, 2020 Share Posted May 4, 2020 (edited) Hi Folks, I randomly have SMART errors cropping up within the same week for both drives. 8 counts of Reallocated sectors on the 1st drive a number of days ago. This morning I've spotted the 2nd parity drive has one UDMA CRC error. I haven't enough experience to assess this properly, but from a bit of Googling, UDMA CRC's are a temporary lapse, usually caused by loose or faulty cables? However the reallocated sectors error is more cause for concern as the machine has essentially decided these sectors are not usuable to reliably write data to? Any insight would be greatly appreciated. finnserver-diagnostics-20200504-1202.zip finnserver-smart-20200504-1211.zip finnserver-smart-20200504-1205.zip Edited May 4, 2020 by Kevinf63 Added SMART reports, missing word *not* Quote Link to comment
JorgeB Posted May 4, 2020 Share Posted May 4, 2020 4 minutes ago, Kevinf63 said: UDMA CRC's are a temporary lapse, usually caused by loose or faulty cables? Yes, and a single error is no case for concern, but if it keeps rising replace the SATA cable. 5 minutes ago, Kevinf63 said: However the reallocated sectors error is more cause for concern as the machine has essentially decided these sectors are usuable to reliably write data to? A few reallocated sectors can be OK, especially if they remain stable, if it keeps climbing it's best to replace it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.