January 2, 201115 yr Put the new power supply in today and now have a few issues. I had to restart the system a three times due to not having the molex connector in good on the backplanes. Once I got it up and running it now only sees 4 drives. It was running fine before I shut it down with all drives being there. Any help or ideas are appreciated. unRaid version 4.5 Norco 4220 ASUS P5E-VM DO motherboard 2 - Supermicro AOC-SAT2-MV8 Corsair CMPSU-650TX power supply syslog-2011-01-01.txt
January 2, 201115 yr According to the syslog, you only have 4 disks connected. Jan 1 18:09:46 Tower emhttp: Device inventory: Jan 1 18:09:46 Tower emhttp: pci-0000:03:01.0-scsi-4:0:0:0 host13 (sdb) ata-SAMSUNG_HD154UI_S1XWJ1LSC10022 Jan 1 18:09:46 Tower emhttp: pci-0000:03:01.0-scsi-5:0:0:0 host14 (sdc) ata-SAMSUNG_HD154UI_S1XWJ1LSC10021 Jan 1 18:09:46 Tower emhttp: pci-0000:03:01.0-scsi-6:0:0:0 host15 (sdd) ata-ST32000542AS_5XW01FGW Jan 1 18:09:46 Tower emhttp: pci-0000:03:01.0-scsi-7:0:0:0 host16 (sde) ata-SAMSUNG_HD203WI_S1UYJ1BZ307477 I think the new power supply is not connected properly to the remaining drives or is defective. Joe L.
January 2, 201115 yr Put the new power supply in today and now have a few issues. I had to restart the system a three times due to not having the molex connector in good on the backplanes. Once I got it up and running it now only sees 4 drives. It was running fine before I shut it down with all drives being there. Any help or ideas are appreciated. unRaid version 4.5 Norco 4220 ASUS P5E-VM DO motherboard 2 - Supermicro AOC-SAT2-MV8 Corsair CMPSU-650TX power supply People have reported in the past that you have to have power plugged into all the molex connectors on the Norco backplanes, that is, can't leave any of them without power connected. If you don't have enough connectors on your new PSU then you will have to get some Y-connectors.
Archived
This topic is now archived and is closed to further replies.