Not sure what is going on, but my Disk 9 keeps getting set back to disabled state. It was pre-cleared fine. data-build was fine. I tried to reset disk stats, but it doesn't work as it just gives a javascript error that usbdisks is not defined. I don't have any.

I have attached my diagnostics.

 

predator-diagnostics-20200508-1101.zip

Edited May 9, 20206 yr by dbinott

Log is spammed with these:

 

May  8 03:41:00 Predator kernel: caller _nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
...
May  8 03:41:30 Predator kernel: resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]

 

Difficult to look for other issues, but disk appears to be offline, at least there's no SMART report for disk9, so swap cables/slot with another disk and try again.

Will give it try. Can you do me a favour though and remove the URL's from your post? Thanks again. I know they are in the diagnostics file, but rather they not be indexed. Those are from pulseway. Thought I removed them.

 

Edited May 8, 20206 yr by dbinott

OK, so I can't change cables since this is an Isilon X400 (Supermicro 847 sort of). I tried moving the disk to a new location and removed and added back the Drive 9. Will have to wait 18 hours again though for rebuild.  Probably should have left it and just changed slots.

 

So after another rebuild I am still having the issues. These errors were carried over from another computer before I updated the drives. My parity 2 has the same issue as Disk 9.

predator-diagnostics-20200509-1159.zip

Diags are after rebooting so not much help.

well i am at the end of my rope. Had to try something. So that's it? I can't do anything?

16 hours ago, dbinott said:

I can't do anything?

If/when it happens again post the diags before rebooting.