May 10, 20206 yr So I am attempting to install to a new flash drive after having some issues with a docker (bin hex pre clear) but am having some problems. When I run the install through the flash creator tool it seems to create the flash correctly. I also use the flash creator tool to assign a static IP because from the start I have not been able to get the server to work using DHCP, It just grabs a 169 address every time. When I boot from the newly created flash drive I am able to boot but it still assigns a 169 address to the server and I can't get in. I know there is more to the process of switching flash devices but I can't even get an IP right now so I can't continue. Right now the array is totally down so I can't get a diagnostic as far as I know. Would appreciate any help. It should also be noted that I use a Unifi USG and 8 port POE switch in tandem with ATT fiber modem. The USG does all the routing and the ATT modem is in bridge mode. Edited May 10, 20206 yr by Sh0ttas
Archived
This topic is now archived and is closed to further replies.