Unassigned Devices - Managing Disk Drives and Remote Shares Outside of The Unraid Array


Recommended Posts

I think I saw it in this thread, but i'll be damned if I can find it;  I have the appearing/disappearing preclear finished status below an empty drive.  What was the fix for that?

 

nevermind.  Just noticed I was on v.2020.12.31 for UD.  updated to v2021.01.16b.  seems to have stopped doing the thing.

Link to comment
3 minutes ago, giganode said:

Hey @dlandon!

 

What do you think about a toggle switch for read/write in MB/s? :)

Personally I think this would be fantastic!

 

And also, could the columns be alligned according to the ones above in cache and array? 😁

Do you mean simply honour the switch at the top right of the Main page that already acts as a toggle of this sort for array drives.

Link to comment
5 hours ago, giganode said:

And also, could the columns be alligned according to the ones above in cache and array?

I've done about the best I can for now.  The information in UD is very dynamic and the table columns change width.  I don't have the time right now to spend on purely cosmetic issues.

Link to comment
3 hours ago, giganode said:

 

Okay, what about the ability to rename the devices? Right now, I have dev 1 and dev 3.. would be nice be able to rename for example dev 1 to VMs or Images  or something like that.

Have you tried clicking on the partition name and changing the name and then pressing Enter?   Works for me

Link to comment
9 hours ago, giganode said:

 

Rename Dev 2 into something different.

What I was trying to ask is why you feel that is important.  It is a designation used by Unraid for unassigned disks.  It is not something that can be changed.

 

Maybe you need to move the device to the pool where you can name it like you are wanting.

Link to comment
14 hours ago, dlandon said:

What I was trying to ask is why you feel that is important.  It is a designation used by Unraid for unassigned disks.  It is not something that can be changed.

 

Maybe you need to move the device to the pool where you can name it like you are wanting.

 

Okay... I saw a possibility there, because in previous versions the names did not exist in that way... they were simply called sdb or nvme1n1 in that column

Link to comment

image.thumb.png.402fd28700f2e90bdc3fd3547a00f6bc.png

 

Any thoughts on why the preclear icon at the bottom will show the temperature for an UD, but not in the listing above?
Also Read/Write never populate (not sure if related, but thought I should mention.)

Diagnostics attached.

If you need anything else, just ask, and please provide instructions as if I'm a complete moron, or haven't had any coffee in days. :D

Thanks!

cube-diagnostics-20210130-1323.zip

Edited by sota
Link to comment
9 minutes ago, sota said:

image.thumb.png.402fd28700f2e90bdc3fd3547a00f6bc.png

 

Any thoughts on why the preclear icon at the bottom will show the temperature for an UD, but not in the listing above?

Diagnostics attached.

If you need anything else, just ask, and please provide instructions as if I'm a complete moron, or haven't had any coffee in days. :D

Thanks!

cube-diagnostics-20210130-1323.zip 238.78 kB · 0 downloads

You have some strange stuff going on.  None of your temperatures are showing.  Preclear is struggling:

Jan 30 07:48:02 Cube nginx: 2021/01/30 07:48:02 [error] 12695#12695: *32314906 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.1.29, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "cube", referrer: "http://cube/Main"
Jan 30 07:48:02 Cube php-fpm[12669]: [WARNING] [pool www] child 19751 exited on signal 7 (SIGBUS) after 126.218227 seconds from start
Jan 30 08:07:02 Cube rc.diskinfo[58387]: SIGHUP received, forcing refresh of disks info.
Jan 30 08:15:01 Cube kernel: sde: sde1
Jan 30 08:15:01 Cube rc.diskinfo[58387]: SIGHUP received, forcing refresh of disks info.
Jan 30 08:15:01 Cube kernel: sdb: sdb1
Jan 30 08:19:01 Cube kernel: sdc: sdc1
Jan 30 08:19:01 Cube kernel: sdd: sdd1
Jan 30 08:19:01 Cube kernel: sdf: sdf1
Jan 30 08:19:01 Cube rc.diskinfo[58387]: SIGHUP received, forcing refresh of disks info.
Jan 30 08:19:01 Cube kernel: sdg: sdg1
Jan 30 08:19:01 Cube nginx: 2021/01/30 08:19:01 [error] 12695#12695: *32332208 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.1.112, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "cube", referrer: "http://cube/Main"
Jan 30 08:19:01 Cube php-fpm[12669]: [WARNING] [pool www] child 63666 exited on signal 7 (SIGBUS) after 86.344191 seconds from start
Jan 30 08:19:01 Cube nginx: 2021/01/30 08:19:01 [error] 12695#12695: *32332513 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: 192.168.1.112, server: , request: "POST /plugins/unassigned.devices/UnassignedDevices.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "cube", referrer: "http://cube/Main"
Jan 30 08:19:01 Cube php-fpm[12669]: [WARNING] [pool www] child 9694 exited on signal 7 (SIGBUS) after 43.772320 seconds from start
Jan 30 08:23:49 Cube kernel: sdg: sdg1
Jan 30 08:23:50 Cube rc.diskinfo[58387]: SIGHUP received, forcing refresh of disks info.
### [PREVIOUS LINE REPEATED 1 TIMES] ###
Jan 30 08:23:50 Cube kernel: sdf: sdf1
Jan 30 08:23:50 Cube kernel: sdc: sdc1
Jan 30 08:23:50 Cube kernel: sde: sde1
Jan 30 08:23:51 Cube kernel: sdb: sdb1
Jan 30 08:23:51 Cube kernel: sdd: sdd1

Start by removing the preclear plugin for the moment and then reboot.

Link to comment

I can try that.  It'll be at least 16+ hours before I can do a reboot though, so i'm not ignoring you. :)

eta:

also I maybe should have mentioned (the whole lack of coffee thing), I'm in the process of doing a full array backup to cold storage, so there's a lot of disk swapping going on, and a specific VM is stopped/started each time.

Edited by sota
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.