Complex install help (mostly Vlans)

Hello fine helpful folks!

 

I am awaiting a new server that should consolidate almost all of my network of support devices and such down to just 2 servers (and a backup nas) and my network gear.

 

So my network is currently laid out like so

 

Default VLAN (1) - 10.10.0.0/21

Kids/IOT (2) - 192.168.0.0/24

VPNOUT (3) - 192.168.1.0/24 (I need to condense this to just 2 IPs but have been lazy)

ANON (4) - 192.168.2.0/24 (This is the other side of vlan 3)

 

My router is 10.10.0.1 and serves most of my general clients

I have a separate physical PFsense box sitting with its WAN on vlan 3, lan on vlan 4. It also has an ip on the 10.10.0.200 to serve as a quick gateway if I dont want to hop vlans for a client device.  I tried virtual and never could get above 30megabit for some reason.

 

I have SAB, Radarr, and Sonarr running on a physical box, using the PIA client (this is the driving issue i need assistance with)

 

There is a Pihole on all of the vlans, each filtering slightly differently

 

There are many other VMs and such running that can all talk on Vlan 1 (libre, homebridge, etc.)

 

There are a Plex physical server (p2000) and freepbx physical server

 

So what I am wanting to do with unraid, is essentially consolidate everything down to the unraid server and the pfsense box.  The unraid server has 24 cores/48 threads and 128gb of ram, it will have 2 10 gig cards added to it as well as the p2000 card for plex.

 

Now here is where I am not finding enough info or am finding conflicting info.

 

The unraid server would reside on vlan 1, probably 10.10.1.100 if I were guessing (servers sit in the .1 octet)

 

I would like to run sab, sonarr, radarr in docker containers (but can go with VMs if thats better) that sit on vlan 1 but use the .200 gateway, so that they can easily be accessed for website guis (there are firewall rules blocking most traffic intra-vlan)

 

How can I accomplish this?

 

I have VMs that run on most of the vlans

 

How do I accomplish this?

 

Does Unraid support VLAN tagging (or rather untagging depending on traffic direction) at the vnic level?

 

I am planning to run Plex in a docker if possible, with the p2000 passed to it, and its metadata on an unassigned ssd, transcoding to ram if possible

 

Is this possible?

 

I would like to run the VMs on their own SSD for the OS drives

 

Is that possible?

 

For additional data to the VMs is symlinks to the array or a virtual disk file on the array the preferred method?

 

Sorry for all the questions, I really dont want to have to add a quad port nic or 2 and would rather just run off 2 10 gig links, 1 if possible.

 

Thanks!