alexantony007 Posted May 28, 2020 Share Posted May 28, 2020 I have 2 Mellanox ConnectX-2 10Gbe NIC 10GBe SFP + on my PC and I have NetApp DS4486 disk shelf. I am using a custom cable ( https://www.fs.com/products/69909.html ) which i got from fs.com after they told this is the best cabling solution for me. I identified 1 mellanox connect x-2 as Ethernet Port 3 but i coulden't identify the second mellanox. But another issue i face is the light on disk shelf is coming on. Can it be the cable problem. I went through the link for setting up my unraid but my disk shelf was not identified. Please help this is my first time setting all of this up. I have been on this for past 3 weeks but till now no go. If someone can help me out it would be awesome. Quote Link to comment
JorgeB Posted May 28, 2020 Share Posted May 28, 2020 This is more likely a hardware issue, but please post the diagnostics, might be some clues there. Quote Link to comment
Vr2Io Posted May 28, 2020 Share Posted May 28, 2020 You need a SAS controller to connect Netapp instead Eth controller. Quote Link to comment
JorgeB Posted May 28, 2020 Share Posted May 28, 2020 Are you trying to connect the NetApp to a Mellanox NIC? If that's the case and like @Bensonit will never work, you need a HBA, like an LSI. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.