June 10, 20206 yr Hi I updated to the latest version and have a Basic package. Ever since the latest version update, I cannot mount any external drives. Does not even allow me to spin up. Please can you assist. ATA Error Count: 6 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 occurred at disk power-on lifetime: 6891 hours (287 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 04 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- Error 5 occurred at disk power-on lifetime: 6891 hours (287 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 04 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- Error 4 occurred at disk power-on lifetime: 6891 hours (287 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 04 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- Error 3 occurred at disk power-on lifetime: 6876 hours (286 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 04 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- Error 2 occurred at disk power-on lifetime: 6873 hours (286 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 08 04 4f c2 00 Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- SMART short self-test:
June 10, 20206 yr 59 minutes ago, Jarrodr said: Ever since the latest version update, I cannot mount any external drives. Does not even allow me to spin up. Attach your complete diagnostics zip file to another post. There is not enough information in a SMART test snippet. Tools--> Diagnostics in the GUI to create the diagnostics file.
June 10, 20206 yr Author 25 minutes ago, Hoopster said: Attach your complete diagnostics zip file to another post. There is not enough information in a SMART test snippet. Tools--> Diagnostics in the GUI to create the diagnostics file. Thanks @Hoopster. attached tower-diagnostics-20200610-1720.zip
June 10, 20206 yr Community Expert Jun 10 15:49:36 Tower kernel: usb 2-3: Disable of device-initiated U1 failed. Jun 10 15:49:42 Tower kernel: usb 2-3: Disable of device-initiated U2 failed. Looks like a problem with the USB controller/HUB, try a port on different one if available.
June 10, 20206 yr Author 18 minutes ago, johnnie.black said: Jun 10 15:49:36 Tower kernel: usb 2-3: Disable of device-initiated U1 failed. Jun 10 15:49:42 Tower kernel: usb 2-3: Disable of device-initiated U2 failed. Looks like a problem with the USB controller/HUB, try a port on different one if available. Tried 2 different ports. One the backpanel and side. On the previous version I had no issues. Any other thoughts? tower-diagnostics-20200610-1832.zip
June 11, 20206 yr Community Expert You could try v6.9-beta1, if it was working before it could be a kernel/driver issue.
Archived
This topic is now archived and is closed to further replies.