June 26, 20206 yr Hello, I'm having an issue with VLANs on unRAID. On my network I have VLAN 3 setup. Anything I plug directly into the switch ports functions as it should with the VLAN. If I try and use the VLAN on unRAID, it won't work (no network connection). I tried with a VM as well and had the same result. Docker and VMs work just fine if I use br0. On unRAID I created the VLAN on my eth0 connection. VLAN Number: 3 Connection: br0.3 Protocol: IPv4 Address Assignment: None Docker: IPv4 custom network on interface br0.3: Subnet: 192.168.3.0/24 Gateway: 192.168.3.1 DHCP pool: not set If I configure a VM to use br0.3, it does not pull an IP from DHCP. There is no connection even if I assign one manually. Let me know if you need additional info. Any ideas as to what could be going on? Resolution: I was overthinking the issue. Recently I swapped out my gateway for a new one. During configuration, I tagged the eth0 port on the switch to use only LAN instead of All Networks. A switch of that setting resolved it. I'm going to leave this post so others also remember the more simple things. Edited June 26, 20206 yr by CrunchyToast Added Resolution
Archived
This topic is now archived and is closed to further replies.