Old flash drive started dying so I made a new flash drive (fat32) and made it bootable on the new one (USB2.0).

 

The question is how do I assign the drives in the GUI based on the old diagnostics file (attached below)? from the old flash drive?

(I'll take pictures for now on).
 

FYI I did NOT have Parity drives setup Yet. ONLY the two cache drives and the 4 other disc drives apart of the Array.

Im ok losing VM's and docker/apps but NOT the files on the Array please!

 

 Also a difference between my old flash drive and my new is that the old flash drive had a folder named "EFI-" but the new flash drive has a folder named "EFI" should I be worried about that?

 

thanks!!!

tower-diagnostics-20200621-2231.zip

Edited June 26, 20206 yr by Tallon

Semi-Resolved:

For anyone that had the same problem as me regarding re-setting up "Drive Assignment Order" with a Fresh install of Unraid on a new Flash Drive:

First setup a new bootable Unraid on your new flash drive.

 

Scenario 1: You have a complete or semi complete backup of your original flash drive; If you want to have your Drive Assignment Order then copy over FlashDrive(boot)/config/super.dat to your new unraid flash drive and then boot up your server. you should now see your original Drives Assigned in the correct slots. Please note that if you have Parity Drives then you there are other steps you MUST take or you will lose data! Check out the referenced link below for more info!

 

Scenario 2: You don't have a backup of your Original Flash Drive: Solution Coming Soon!

 

Reference:

 

Edited June 26, 20206 yr by Tallon