[SOLVED] New hardware , No webUI


Recommended Posts

Ive just replaced my hardware (cpu,mobo,ram) and cannot access my system via webUI

 

Ive attached a monitor and keyboard to my system and can access bios just fine, 

Unraid boots to the splashscreen where i can make a choice.

Unraid OS - Takes me to the following:

image.thumb.png.09f6a11146057f759307ce4c0ba28401.png

I can login at this cmd line

But i cant access the server via IP on another machine

 

Unraid OS with GUI - Takes me to a blank screen with a white - in the top right hand corner. And still no access via another machine

 

Lost on what to try next?

Edited by bdydrp
SOLVED
Link to comment

Ive removed both files

Also removed the 4 port intel card so that its forced to use the onboard NIC

 

When unraid loads, i get to login 

The lines

IPv4 - Not set

IPv6 - Not set

 

Should both network.cfg and network-rules.cfg files get re-created upon boot?

And an IP should be assigned via DHCP?

 

Also, selecting Unraid with WebUI, only loads to blank screen still!

 

 

Edited by bdydrp
Link to comment
2 minutes ago, bdydrp said:

Should both network.cfg and network-rules.cfg files get re-created upon boot?

With a single NIC only network.cfg would be re-created, if it isn't it points to a problem with the flash drive, i.e., it's not booting correctly.

 

3 minutes ago, bdydrp said:

And an IP should be assigned via DHCP?

Yes.

 

Backup current flash, re-create it using the USB tool then restore the config folder.

 

Link to comment

Thanks

 

 

28 minutes ago, johnnie.black said:

With a single NIC only network.cfg would be re-created, if it isn't it points to a problem with the flash drive, i.e., it's not booting correctly.

I'll double check, but i dont think a new network.cfg file was created

Ill backup USB anyway, and if all else fails, will recreate usb drive and restore config

Cheers 

Edited by bdydrp
Link to comment
3 hours ago, johnnie.black said:

Possibly, is network.cfg being created? If not see if you can get the diags from the console by typing "diagnostics"

Yes, network.cfg is created and I can see its set to dhcp. 

I'll get the diagnostics and post them when I'm home. 

 

Link to comment
  • JorgeB changed the title to [SOLVED] New hardware , No webUI

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.