flic Posted July 2, 2020 Share Posted July 2, 2020 Somehow 1 drive of my array got corrupted. So, I replace it. It show "Unmountable: No file system" on the far right of the drive Then start the array to start the recovery of the drive. So far so good. After +16 hours of "Parity-Sync/Data-Rebuild in progress." my drive still says "Unmountable: No file system" Should the Parity-Sync/Data-Rebuild reformat my drive and rebuild the data that was on the drive? Quote Link to comment
trurl Posted July 2, 2020 Share Posted July 2, 2020 24 minutes ago, flic said: Should the Parity-Sync/Data-Rebuild reformat my drive and rebuild the data that was on the drive? It doesn't reformat (since the format is part of the rebuild) but it does rebuild the data that was on the drive. Unfortunately, that data is a corrupt filesystem. Rebuild can't fix that. You have to do another procedure: https://wiki.unraid.net/Check_Disk_Filesystems#Checking_and_fixing_drives_in_the_webGui Quote Link to comment
flic Posted July 2, 2020 Author Share Posted July 2, 2020 ok thanks trurl. I will try that Quote Link to comment
flic Posted July 2, 2020 Author Share Posted July 2, 2020 xfs_repair worked! Parity-Sync/Data-Rebuild in progress... brb in +16 to report Quote Link to comment
flic Posted July 4, 2020 Author Share Posted July 4, 2020 great! ran "Dynamix File Integrity" after and 0 file corrupted kudos to unRAID dev team 😎 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.