driller1969 Posted July 7, 2020 Share Posted July 7, 2020 Hi All, Had a couple of disks show errors - but not sure how bad these are and what disks I should perhaps be replacing? Appreciate any advice that can be provided. Cheers Ed tower-syslog-20200707-0955.zip Quote Link to comment
JorgeB Posted July 7, 2020 Share Posted July 7, 2020 Please post the diagnostics instead: Tools -> Diagnostics Quote Link to comment
driller1969 Posted July 7, 2020 Author Share Posted July 7, 2020 Opps - TY - Done : ) tower-diagnostics-20200707-2251.zip Quote Link to comment
JorgeB Posted July 7, 2020 Share Posted July 7, 2020 I'm not seeing any disk read errors, there are some ATA errors on disk7, and since the disk look healthy it could be the typical SASLP problem, parity was updated after some of those, possibly incorrectly, you can swap that disk with another one using the onboard SATA ports and run another check, also I would recommend replacing the SASLP with an LSI ASAP. Quote Link to comment
driller1969 Posted July 7, 2020 Author Share Posted July 7, 2020 Thanks Johnnie appreciate the response. PS: Which LSI controller is most recommended? Quote Link to comment
JorgeB Posted July 8, 2020 Share Posted July 8, 2020 Any LSI with a SAS2008/2308/3008/3408 chipset in IT mode, e.g., 9201-8i, 9211-8i, 9207-8i, 9300-8i, 9400-8i, etc and clones, like the Dell H200/H310 and IBM M1015, these latter ones need to be crossflashed. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.