July 9, 20206 yr Just got my first server delivered from eBay. Specs: Dell T620 - Motherboard: OMX4YF H710 RAID Controller 4 x 2TB SAS drives Dual CPU E5-2660 @ 2.2GHz 64 GB DDR3 Multi-bit ECC I deleted the current virtual disk from the RAID Controller and Started the drives in the BIOS I've rebooted but still do not see the unassigned drives. I've even installed the Unassigned Drives plugin. Under Tools > System Devices the only thing under SCSI Devices is the boot USB and the DVD drive Where do I start? My goal is to get a Plex docker spun up and see how load the server is while transcoding.
July 9, 20206 yr Do you see the drives in the BIOS (either mb or HBA?) Post your diagnostics (tools - diagnostics)
July 9, 20206 yr I would guess that's because it is a RAID controller, not an HBA card. From what I understant, unRAID does not work well with RAID controlers. I don't know if this particular card can be flashed in IT mode. But I am sure some people here will be able to assist you on that.
July 9, 20206 yr Author Found the answer H710 - CANNOT use disks in non-RAID - ALL disks must be configured in a RAID array in order to be presented to the OS. If you need to use a non-redundant, single, individual drive, then it must be configured as a single-disk RAID 0. Fixed it by doing as instructed
Archived
This topic is now archived and is closed to further replies.