Jump to content

Final Build - Last Hardware Thread I Promise!


hansolo77

Recommended Posts

Posted

Hey guys, sorry for the multiple threads.  I wanted to get input at the various stages of my build parts.  I pulled the trigger on TheServerStore, eBay, NewEgg, and Amazon!!  Parts are in shipping status, not yet received.  Here is the planned build:

 

  • Case
    • SuperMicro 4U CSE-846 Barebone with 2x PWS-920P-SQ Redundant Power Supplies - (link)
      • PLANNED ADDITIONS:
        • 2x Single 3.5" Fixed HDD Tray (or) 1x Dual 2.5" Fixed HDD Tray (depends on what model revision my case will be when I get it) - (link) or (link)
          • These will hold my 2x 12tb Parity Drives, or if I determine I can't have 2x 3.5" drives, it will hold one of them and the 2.5" drives will be for things like VM's and Plex Metadata
        • 2x Noctua NF-A8 PWM 80mm Fans - (link)
          • These are going to be installed on the back of the case to vent case heat.
        • 3x Noctua NF-A12x25 PWM 120mm Fans - (link)
          • These are replacing the current fan wall.  Hopefully this will be a quiet system.
  • Motherboard
    • MSI MEG X570 UNIFY AM4 AMD X570 SATA 6Gb/s ATX AMD Motherboard - (link)

      • SELLING POINTS:

        • Support for 128gb DDR4 RAM (ECC or not), up to 4600Mhz

        • Support for 3rd Gen Ryzen CPU

          • Needed for Ryzen CPU

        • 3x PCIe 4.0/3.0 16x Slots

          • Needed for GPU and HBA Controller

        • 2x PCIe 4.0/3.0 1x Slots (although only 1 can be used at a time)

          • Needed for TV Tuner

        • 3x M.2/NVMe 4.0/3.0 4x Slots

          • Needed for unRaid Cache and OS (or) Plex Metadata, etc.

  • CPU

    • AMD Ryzen 9 3900X 12-core, 24-thread unlocked desktop processor with Wraith Prism LED Cooler - (link)

      • SELLING POINTS:

        • 12 Cores, 24 Threads - Great for Plex transcoding and VM's

        • 3rd Gen Ryzen - Stable History

        • 4.6 GHz - Super Fast!

        • PCIe 4.0 Ready - Great for my needs!
        • It was on sale. ^_^
  • RAM
    • G.SKILL Ripjaws V Series 64GB (2 x 32GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Intel XMP 2.0 Desktop Memory Model F4-3600C18D-64GVK - (link)

      • SELLING POINTS:

        • DDR4 3600 MHz

        • The 16GB size is on the motherboard's compatible list

        • 1/2 the total I can install, a good starting point

        • No fancy RGB crap I don't need inside a server case adding extra cost

        • It was on sale. ^_^

  • GPU

    • PNY NVIDIA Quadro P2200 - (link)

      • OOPS!  SH!T I meant to get the P2000.  Hopefully this is compatible with the modded firmware/driver thing people are using with Plex.  If not, I'll have to return it.

      • SELLING POINTS:

        • Does not require additional power (pretty sure my case's PDU doesn't come with enough plugs for it).

        • Can be modded to drive a lot more Plex hardware transcoding (hopefully)

        • ...comes with a fan?  I guess?.... not really a whole lot of selling point details needed.

        • Might be useful for gaming inside a VM?

  • HBA Controller

    • Lenovo 03X4446 9217-8i 6Gbps SAS PCI-E 3.0 HBA P20 IT Mode ZFS FreeNAS unRAID - (link)

      • SELLING POINTS:

        • Preflashed to IT mode - Excellent because I don't know how to do that and might screw it up!

        • Based on the LSI SAS2308 SAS controller chipset

        • 6Gbps Speed

        • Utilizes standard SFF-8087 plugs so I don't need to order different cables

        • 2x internal (vs 1 internal and 1 external or 2 external) SFF-8087 connectors carrying x4 SAS lanes each for a total of x8 lanes

        • Case backplane has a built in expander, so I should only need 1 connector to drive all 24 bays.  Using the 2nd connector may or may not make transfers faster, have to research more.  If not, I could end up using it to connect to an external plug and bring it to another 24 bay case.

        • The only next upgrade would be to get the SAS3008 controllers which would:

          • Upgrade speeds to 12Gbps (Only useful if I had 24xSSD drives)

          • Require different cables (SFF-8643 -> SFF-8087)

          • Require a different backplane to support the 12Gbps

          • Cost a lot more.

 

So that's where I'm at now.  I also have said 2x 12TB drives for the Parity, as well as an assortment of 24x drives varrying from 4TB to 8TB.  I also have a 4x SSD drive collection that holds my current server's OS; a dedicated "download" drive (essentially like unRaid's cache), a dedicated Plex drive, and a dedicated VM drive.  The part I need help with now is the M.2/NVMe drives.  I definitely want to use 2 of the slots for unRaid's cache.  But I'm not sure what I should get.  I don't want to buy more than I need.  What is a good base level?  256GB, 512GB, 1TB?  From watching many Youtube videos, I've learned it's best to not utilize the cache drives when first dumping files from one server to the other, but after that?  I do a lot of BluRay/DVD rips on my main computer then dump them over to my server currently.  The filesizes are rather large, but I don't forsee having to do more than 60GB per.  But, I do occasionally do many at a time.  So I don't think something like 120GB would be sufficient.  I'm thinking the 256GB might be a little small too, but I'm not sure.  What is the average size most people are getting?  As for the other M.2/NVMe slot, I was going to go with a drive just for the OS.  But it looks like that's going to be tremendous overkill for unRaid.  I could put in a 512GB or 1TB for Plex metadata though.  My current metadata drive is a 1TB SSD which already has about 200GB on it (I also use this to store my recorded TV/PVR stuff).  I'm trying to think of a good use for this that I know I'll have in my future.  I know I'll have VM's, specifically one that runs Windows Server so I can continue to make backups of my computer.  So I think if I move the Plex metadata off the SSD and onto an M.2/NVMe it would not only make things run faster, it will free up the SSD for using those VM's on a dedicated disk rather than having them be in the pool.  Thoughts?

 

I absolutely appreciate all the help and community input for my build so far.  It's only been 2 or 3 people but it really has helped me make the right decisions.  I just need this last bit of help with recommending the right solution for the M.2/NVMe for cache and I'll be "off to the races"!  After that, it's just a matter of getting everything in, built, and running.  Thanks again!

  • Like 1
Posted

Very cool list - I appreciate being able to piggyback off your work. Funny we both had pretty similar situations and use cases. I've been using Unraid for some time so if you need some newbie guidance there, happy to help. As for cache, I have a 256GB SSD, and it's about 26% utilized - and that's with not being very diligent about keeping it clean of stuff that shouldn't wind up on it. Never had a problem there.

 

Did you get the case from The Server Store? It shows they are out of stock again - I've put myself in line. 

Posted

I did receive the case.  Have a look here.  I really appreciate the offer Nate was able to do for me.  I don't recommend trying it though, simply because he indicated to me that they DO want to try to keep the prebuilt systems as prebuilt.  However, I was fully ready to buy a prebuilt system too, just though I'd see if he could do anything.  Honestly, a prebuilt system isn't that bad, they come with 2 processors and fully loaded with RAM.  But since I was initially going to to build with new parts (mobo/ram/cpu) I was hopeful to get a barebones.  I was just going to gut out their parts and maybe flip them on eBay.  So that's definitely still an option.  Ebay/Craigslist has listings all the time too.  The main reason I wanted TheServerStore though is because my last case I bought off eBay arrived damaged because of how it was packed.  TheServerStore packs their stuff using a "Foam-In-Place" system that protects all the edges.  I did notice the front plate has a small bend in it, but overall it's a HUGE improvement over what I had before.  I'm very happy it.

 

That's good to hear about the cache drives.  I'm still not sure about a good capacity.  The motherboard I bought (still shipping) has 3 M.2/NVMe slots.  I did order a 1tb Samsung EVO PRO 970.  Initially I was thinking of 2 cache and then an OS drive.  But, I've changed that over to just the 2 cache and decided to use the new 1tb drive as a Plex metadata drive.  I'm thinking about just going with more 1tb EVO PRO drives.  The reason being, smaller capacity drives have a much smaller onboard flash cache that improves the writing speed when transferring files.  So much smaller in fact, that in video's I've seen it literally kills off the speed after like 10 seconds.  I don't want that to happen.  1tb seems to be a good medium versus cost.  2tb drives are even better with the cache size but they're WAY more expensive too.  So that's what I think I'm going to do unless I can be convinced otherwise.

 

As my build stands right now, I've got most of the main hardware stuff.  The motherboard, ram, and 120mm fans are coming from Newegg and have been sitting with a label on it's box since Saturday (it's now the following Thursday) in their California warehouse waiting for UPS to pick up.  I'm starting to get upset about it because I ordered everything on Friday and the following day it said the label/tracking was made, and they STILL haven't picked up yet.  From Amazon, I've already got the processor, exhaust fans, P2200 GPU, and a 16gb Kingston flash drive (along with a motherboard mounting USB cable).  From eBay I got the motherboard front panel adapter and the HBA controller card.  These have all been delivered.  So right now I'm just waiting on UPS to pick up and start shipping the motherboard and ram.

 

While waiting on UPS, I've also started to order some other parts.  When I got the chassis, I took the cover off and saw that there ARE mounting holes for 2 of the 3.5" hard drive caddies along the power supply wall.  So I've ordered 2 of them.  Of course, I ordered them from Newegg because Amazon and eBay wanted WAY to much for them, and I got free shipping.  Surprisingly, it showed shipped the next day, and according to the tracking it's already half way here and expected to be delivered Monday.  Other parts I've been getting include some 4-Pin Molex splitters and 4-pin to 15-pin SATA power adapters.  The PDU looks like it comes with enough connectors for the backplane (already installed) plus 1 extra standard 4-pin.  Then it has 1 24-pin connector and 1 8-pin connector for the motherboard.  My motherboard requires 2 8-pin connectors so I ordered a splitter for that as well.  I don't know how well it will perform, but hopefully 2x920w power supplies should be enough to drive 5 fans, 24 drive bay drives, 2x3.5" power wall drives, and a small collection of 2.5" ssd drives.  I still need to figure out how to handle those.  I might just dangle them for the time being.

 

So... yeah that's where I'm at.

Posted

I don't know yet.  Today was build day.  Newegg finally delivered my motherboard and ram.  When I got off work I started putting things together.  I went bare basics first.  Just motherboard in the chassis, cpu, and then the ram.  Connected the power cables and the front panel.  Then I powered it on.  AND.... 😛

 

There was a beep and a tiny blue LED on the backplane but nothing else.  Connecting the power supplies to the motherboard gave me a nice lit up led on the motherboard, so I knew it was getting power.  But I'm completely lost now as to what's going on.  I initially thought the backplane was where the beep was coming from, so I googled that.  Some other people had similar situations.  Theirs were related to things like the backplane not liking the fans of the fan connected to the motherboard instead of the backplane, etc.  I tried that.  There's also a jumper you can set to disable the fan check.  Tried that too.  Nothing.  Then I thought I'd just disconnect everything that uses power, and just test the power supplies.  I looked online to be sure, and used a set of pliers to force close the pins on the 24-pin connector that trip the power-on with ground.  Sure enough, it does the same thing.  Beeps then dies.  So I don't know if I've got a bad power distributor or 1 or 2 bad power supplies.  Would explain why the original company that owned it would have recycled to TheServerStore.  I'm just not sure though.  It's my understanding that TheServerStore fully cleans and tests their products before shipping.  So either I screwed something up (unlikely) or the power supplies or distributor got damaged after they tested it.  For all I know it could have been damaged during shipping.  I did notice that one of the power supplies was crushed a little, causing it to be very difficult to extract.  But these are redundant, so I tested them one at a time with the other pulled partially out.. still nothing.

 

I tried to contact SuperMicro's web chat, but their office was closed.  It's possible they're going to be closed all weekend.  But I did request in their bot chat to have them contact me.  I gave them the details about the chassis, the power supplies, and the distributor.  Hopefully I'll get a response back in email.  But as it stands, I have a nice case with nice parts, with no power.  :(

Posted

Outch I hope that you can get the parts that you need and if you test the card please let me know because I’m thinking on get the same card.

Posted
7 hours ago, hansolo77 said:

used a set of pliers to force close the pins on the 24-pin connector that trip the power-on with ground.  Sure enough, it does the same thing.  Beeps then dies.

Just to be clear, you had all the PSU leads disconnected and the motherboard pulled back out for this test? A short to ground would cause this symptom.

Posted

I definitely think it's a bad power distributor.  I just tested the 24-pin connector with a multimeter.  When I test the +12v leads I'm getting some crazy numbers like 67-68v.  When I test the +3v leads I'm getting only about 1v.  The +5v leads don't even register.  Granted, I could be doing it completely wrong, but I watched some youtube videos where they're testing on GOOD power supplies and I'm not getting anything like what I should be expecting.

Posted (edited)

I did another test.  I pulled out my main computer and set it side by side with the server.  I wasn't able to get the 8-pin cable loose without having to completely gut the machine.  But I got the 24-pin out and connected it to the server motherboard.  It powered on.  Since I didn't have the 8-pin connected, I didn't want to test fate any more than necessary.  The CPU fan powered on with it's RGB stuff.  And the case fans came on.  Everything looks good.  I didn't have video connected so I just turned it off.

 

After that, I pulled out the power distributor to see if I could see any damage.  There didn't seem to be anything visible on the front/top of it.  But then I took it off the mounting plate and DAMN.  It's definitely a bad distributor.

IMG-0237.jpg

I contacted the sales rep at TheServerStore.  Before I took the picture he replied back saying it would be no problem to replace.  Apparently they have a few damaged chassis to get spare parts from.  He's out of the office until Tuesday but said he'd contact them right away to have somebody there get a replacement out quick.  That's awesome.  I found a few eBay items that were just impossibly expensive because they'd be internationally shipping for like $80.  Before Nate said he could get me a replacement, I found a cheaper option on Amazon and was about to click the order button before he replied back.  So hopefully I'll get this part in and I'll be good to go.  I'll update as things progress.

 

=======

UPDATE

=======

 

Funny thing too.  When I first took the top cover off the chassis when I got it, I noticed a slight metallic smell.  When I started taking things out, like the fan shroud and fan wall, I noticed the smell was coming from the plastic shroud around the power distributor wires.  I didn't think anything of it at the time, chalked it up as a "new case smell".  When I started to install the motherboard, I had pulled that shroud cover off to reorganize the wires better.  I saw some darker splotches at the top of the shroud that smelled even stronger of that metallic smell.  I figured it was just because it is an old chassis and had been used and that was just some dust or something that got stuck on the inside.  So yeah, I think this was DOA and not something I had done wrong.  I just hope that when I get the replacement I don't do something to screw it up, in case it WAS me.

Edited by hansolo77
Posted

Good luck! Following you closely. For myself, I called Nate and Kenneth at The Server Store and purchased the least-configured CSE-846 they had:

 

- SUPERMICRO 4U W/ X9DRI-F
- NO PROCESSORS (WITH HEATSINKS)

- NO MEMORY
- 24X TRAYS W. SCREWS (RED TABS) NO RAID CONTROLLER (SAS CABLES INCLUDED)
- DUAL PWS-1K21P-1R

 

It will be shipped out Monday. I'll probably resell the X9DRI-F board on eBay. TSS was pretty insistent the -SQ power supplies were only beneficial (in a quieter way) with a specific motherboard we aren't using. Doesn't really matter - they didn't have any -SQ's left anyway. Maybe I'll replace them later on if I hear from this board that they are indeed quieter irregardless of the mainboard.

 

I also purchased the UNITY mainboard from NewEgg - it's on backorder so it'll get here when it gets here. Not in a hurry.

Posted

Same to you - good luck!  I've only been in chat/email communication with Nate.  He's definitely a good guy near as I can tell.  Sounds like they were able to get a build for you too.  Hopefully you won't have a defective power distributor.

 

I wasn't aware of any lack of benefits with the SQ's other than they were of lower wattage.  I know these are redundant supplies though, not combined.  So for me, I'm only getting 920 watts, not 1040..  Should still be adequate I would think.  I know they have different distributors that provide different amounts of connector options, but other than that I think they just are lower wattage and quieter fans.  >shrug<

 

As for my situation.. I haven't heard anything more from Nate or TheServerStore in the way of a confirmation or tracking number.  But I have a strong faith in that company and they've been good to their word so far.  Hopefully they will solve my problem.

Posted

Have you gotten the P2200 to work? Considering getting that instead of P2000 because it is cheaper from Dell than the P2000. Really curious how it compares because it appears to be a faster card.

Posted
4 hours ago, Idolwild said:

So you’ve got the entire thing assembled already? Or are you pre-clearing then from another machine? 

I've got it mostly assembled.  I still need to move over the tuner card from my current server.  And yea, I'm just preclearing drives from my old server right now before I start migrating all the data over.

 

4 hours ago, stepmback said:

Have you gotten the P2200 to work? Considering getting that instead of P2000 because it is cheaper from Dell than the P2000. Really curious how it compares because it appears to be a faster card.

 

As it is right now, I have got the P2200 installed, and used it to configure my BIOS.  I haven't installed the PLEX stuff yet, so I don't know how well it will perform.  I would imagine it will work just as good if not slightly better.  I'm not planning on doing a massive 20+ stream test if that's what you're looking for.  But so far, I was able to use it for BIOS and for initial setup of unRaid, if that's helpful.  I guess that means the drivers work with it.  I didn't need to do any manual driver updating, etc.  UnRaid detects it and displays the details like it should.  I won't be able to test it's hardware encoding/decoding for quite some time, as I'm just now starting to get drives installed and moving over my data.

  • Like 1
Posted (edited)

Nice to hear it's coming together. Besides the Molex splitters and such, I'm looking to round out the other wiring adaptors and anything else I might need in that regard (outside of core hardware components of CPU, motherboard, memory, HBA, and drives).

  • What splitter did you end up getting to power the motherboard?
  • In another post, you mentioned some kind of mounting adaptor you had to get for this motherboard in this chassis? Can you elaborate on that?
  • What did you end up doing with the fanwall and the 120 fans?
  • Did you end up purchasing (Supermicro 15cm 16-Pin Front Control Panel Split / Extension Cable (CBL-0084L)) for the front panel?
  • What did you learn on connecting one lead vs. two for the HBA?
Edited by Idolwild
More questions.
Posted

Oh my F-G... @#)(H$T

I'm so bummed I'm pissed.  When I got home today I unboxed another 12tb drive to put into the first drive caddie.  At first, it seemed like a struggle to get it to close in place.  With the top cover off, I watched very carefully at what was happening.  It looks like the backplane wasn't fully secured in the case.  In fact, it was held in place by only 1 screw at the top (should have 4) and the 5 screws at the bottom.  So when I was trying to insert the drive, it was pushing the backplane away.  So for a test, I just held the backplane while I put in the drive.  Ok, connection was good right?  Powered up, and the stupid HBA comes up saying it couldn't detect any devices!  WTF.  Also to note, there wasn't any power light on the front of the drive bay to indicate the drive was spinning.  If I put my hand on top of the bay, I couldn't feel it spinning either.  But, on the back of the backplane, there are 3 lit up LEDs, so I know it's getting power.  I took the whole backplane out as a test, and just set it down on it's back with the drive ports facing up.  Then I put the drive in a different port.  Interestingly, with the setup like that, I could definitely tell the drive was now spinning up, but the HBA controller still isn't detecting any devices attached.  I don't know what's wrong.  I found the manual online and found a jumper that needs enabled to show the Activity LED's, so I connected that.  Now ALL the drive bays are lit up (good I guess to indicate they should all be working).  But I'm still not getting any detection on the HBA.  I don't know if the backplane is bad, the SAS connectors/cables, or the controller.  I don't even know how to test without additional cables/cards.  I really don't want to have to buy more stuff just to find out it still does it.

ARGH!

 

Anyway....

 

2 hours ago, Idolwild said:

Nice to hear it's coming together. Besides the Molex splitters and such, I'm looking to round out the other wiring adaptors and anything else I might need in that regard (outside of core hardware components of CPU, motherboard, memory, HBA, and drives).

  • What splitter did you end up getting to power the motherboard?

I ended up buying this, after sending back the WRONG cable.  I had originally bought a cable that splits an 8-pin VGA power to 2, not an 8-pin EPS cable which the motherboard uses.

  • In another post, you mentioned some kind of mounting adaptor you had to get for this motherboard in this chassis? Can you elaborate on that?

Yup.  It's not something I "HAD" to get.  There is a mounting bracket you can get that screws into the side wall of the power supplies.  Depending on what model chassis you get, there are a few different options.  One option is a bracket set that has a 3.5" drive and two 2.5" drives.  Another option is a hotswap 2.5" caddie for the back of the case.  Another option is DVD drive for the back of the case.  Or, in my case, a set of brackets that holds a 3.5" drive side by side.  These don't come in a set, so you have to buy 2.  But, I've got them installed with 2x12tb drives for my Parity.  I also discovered that the SATA power cables I had prevent the top of the case from being closed.  So I ordered today a right-angle splitter.  Hopefully that's all I'll need.

  • What did you end up doing with the fanwall and the 120 fans?

I'm actually still in the process of working on this.  I had to remove it while troubleshooting my drive problem.  But essentially, I got some zip ties.  I put all 3 fans together and zip tied the screw holes together.  Then, there is a small little switch that does the chassis intrusion.  I took that out.  It then opened up a free hole.  I ran a zip tie from the last fan closest to that hole and then through that hole.  It will secure it pretty well.  I didn't lock it down though yet.  Lastly, when I know everything is working, I will put some foam weather stripping across the top so there won't be any backwash.  The fan wall sits on a nice base that has cutouts for wires.  I ran the fan wires through them and out to the motherboard.  One fan needed an extension cable (included with Noctua fans) to reach the motherboard.  That's it.  You can also connect the fans to the drive bay backplane if you want, but I went the motherboard route.

  • Did you end up purchasing (Supermicro 15cm 16-Pin Front Control Panel Split / Extension Cable (CBL-0084L)) for the front panel?

I did.  And I got it really cheap from eBay!  It looks like the seller may have doubled the price since I bought mine though.  It's $5 now, but still free shipping.  One thing I noticed with this specific motherboard is that you don't get pinouts for all the available LED's.  Meaning, you don't get the NIC activity LED's or anything like power/fan failure and location.  The HDD and POWER LED's should work, but don't for me for some reason (I think that whole LED bracket might be broke, but the power button works).

  • What did you learn on connecting one lead vs. two for the HBA?

So the way the backplane I have (BPN-SAS2-846EL1) is designed, the controller will only use/need 1 cable.  If you connect both cables to the backplane, it will essentially use the 2nd as a failover backup in case the first one stops working.  I believe you can get double throughput if you have 2 controller cards, but using just 1 controller gives you just 1 connection.  The backplane has a built in expander, so 1 cable is all you need.  In my particular problem though, I've tried using 1 cable and 2 cables, and I can't get any drives to be detected.  I contact the HBA seller to see if he has any recommendations. 

 

Posted

Really appreciate the feedback and it absolutely sucks the problems you are running into. I hope it's not an indictment on the quality of what TheServerStore is putting out. My chassis arrived today, but I'm still shy most components.

Posted

They've been good at replacing DOA parts.  I really don't think it's a bad backplane.  It lights up, front and back.  With a drive connected to it, it does spin up.  The only part that might be bad would be the connectors that the SAS cables connect to.  There should be a buzzer on it that will go off if there is any failure.  I just think the problem is further back, like the cables themselves or the controller.  Like I said, I contacted the seller of the controller so I'm going to see what he has to say.

Posted

Ok, last update before bed.

 

So I contacted the seller about the HBA.  "TheArtofServer".  Swell guy.  He helped me troubleshoot the problem a bit.  Apparently the controller is working like it should.  There is a lack of communication between the backplane and the controller.  Could be with the cables, could be the backplane.  He had me go into the controller's settings, where there is a screen you can see the attached devices.  It says there aren't any.  He said that even without a drive connected, it should still report a connection to the expander chip on the backplane, indicating it as an "enclosure".  I'm not getting that.  He remembered my issue with the power distributor, because I reached out to him to see if he thought it might be the backplane making the sound.  He suspects that the power distributor being blown probably fried the expander chip on the backplane too, which is why it's not able to be detected on the controller.  I tested this further by connecting some old forward breakout cables to the HBA.  They essentially convert 1 SAS connector to 4 SATA connectors.  When I did that, and attached a drive, the controller detected it exactly like it should.  So the problem is definitely with the backplane, or the cables, and not the controller card (that's a relief).  I agree with him about it being the backplane though.  And here's why.  When I took a much better look at the backplane, I noticed a chip that was blown with some tell tale scorching around it.  Bingo.  So the backplane might be getting power, but it's communications are gone.  I just sent another email out to Nate to see if he might be willing to do an exchange.  If not, I can always get one from TheArtofServer for a decent price.  It just sucks I'm going to have to wait even longer now.  I'll report back once I hear from Nate.

 

In the mean while, I took some proof pictures with my cellphone and uploaded them to an online album.  Feel free to look and judge for yourself.

https://ibb.co/album/ScZX9W

Posted

I've got a response from Nate (TheServerStore).  Still gotta give props to them.  He said they had over a thousand of these cases come in and go right back out.  The demand was so high that they weren't able to thoroughly test them like they usually do.  He said it was bound to happen to some of them, I just got a bad draw.  But he said he'd get a replacement sent out to me Monday and would use Expedited Shipping.  Turn around time for me from them has been about 4 business days.  At least, it was on both the chassis and then the power distributor.  So Expedited might get me 1-2 days less wait time.  If not, it's no big deal.  But wow, they're willing to do that for me without even asking.  So cool.

 

In the mean time, I've now got the 2x12tb parity drives and 2x1tb M.2 drives all precleared.  I just assigned the parity drives so they're ready to go.  Until I get the backplane, I've got another 12tb drive about to start it's preclearing for my first true storage drive.  I've got a lot more to go but it's going to take time.  I'm having to move data off one server over the network (1gb, not 10gb) to the new one, and then as drives clear out I'll be moving them over too.  I've never used unraid before, so this is a bit overwhelming. 

 

One issue I'm having... I've got both  the "Unassigned Devices" and the "Preclear Disks" community addons installed, but I'm not seeing the option on my main screen to do the preclear.  I've seen Youtube videos where guys just go to that screen and it's an option next to the drive.  I don't see it.  Instead, I have to go to the Plugins tab then select the Preclear Disks addon.  Is there a setting somewhere I'm overlooking?  Or is it maybe because I'm still running the trial?  Another thing it might be, although I had the problem before, is that I updated to the latest beta version of unraid so I could get CPU/Motherboard temps.

 

Anyway, things are slowly coming together for me.  I'm excited!

Posted

Wooooo!!!  New backplane came in today.  They overnighted it to me!  All my drives are precleared and ready to go.  So I've assigned them to where they need to go and started the array for the first time!  It's building it's parity check right now, so I'm just getting ready before I start bringing files over from my old server.

 

That said, I know I'm going to be using PLEX.  This server is going to be predominately used for that, with the exception of a VM for Windows Server so I can continue to have backups of my computer.  I'm trying to create my file structure to use, and I'm so totally lost with the whole split-level thing.  I found the "unofficial manual" and have been trying to wrap my head around it, but I just can't figure it out.  I need some help!

 

So here's what I've got:

 

  1. Do I create a root "media" share then put everything into that, or do I create a share for each type of media, like "movies", "tv shows", "music?".
  2. I want to have all the files associated with a movie folder to be all on the same drive, but movies themselves can be split among all the drives.
  3. I want to have all the epsidoes of a tv show's given season to be on the same drive, but each season can be split among all the drives.
  • /media
    • Movies
      • 4k
        • movie 1
        • movie 2
      • Regular
        • movie 3
        • movie 4
    • TV Shows
      • Anime & Cartoons
        • Show 1
          • Season 1
            • episode 1
            • episode 2
          • Season 2
            • episode 1
            • episode 2
        • Show 2 (etc)
      • Live Action
        • Show 1
          • Season 1
            • episode 1
            • episode 2
          • Season 2
            • episode 1
            • episode 2
        • Show 2 (etc)
    • Music
      • Artist Albums
        • Artist 1
          • Album 1
          • Album 2
        • Artist 2 (etc)
      • Artist Singles
        • Artist 1
          • Album 1
          • Album 2
        • Artist 2 (etc)
      • Compilations
        • Artist 1
          • Album 1
          • Album 2
        • Artist 2 (etc)
    • Photos
      • My Photos
        • Camera 1
          • Folder Of Date Shot
            • photo 1
            • photo 2
        • Camera 2 (etc)
      • Dad's Photos
        • Random Folders/Dates (not very organized)
          • photo 1
          • photo 2
      • Mom's Photos
        • Random Folders/Dates (not very organized)
          • photo 1
          • photo 2

Looking at my current server structure, it's very similar.  But rather than have a "media" root folder, I have a series, like "Videos", "Music", "Photos".  Maybe that should be how I should do it?  I want to make it as simple as possible, yet still have proper split-leveling so I'm not watching episodes of a tv show spread over multiple drives, or listening to music and have to wait for a drive to spin back up to load the next song, etc.

 

Am I just over-complicating this?  I have been upgrading to larger capacity drives, so it may not even be an issue.  Right now I have the 1x12tb data drive, but will be moving over lots of other drives in varying sizes, 8tb, lots of 4tb, and a few 1.5-2tb.  Maybe it's not even an issue.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...