alhatmy Posted July 13, 2020 Share Posted July 13, 2020 Got this strange issue .. I hope to find a fix ! 1- Yesterday, Drive X went offline (disabled) and I had to rebuild the server .. till that time seems the 1 Parity online took over 2- I didn't reboot the server only stopped the Array, plugged 1 new driver to be the 2nd Parity and changed Drive X cables .. it worked again! 3- Started the Array again, I could see Drive x data and started the sync ... it requires 1 day 4- During the sync I Paused the sync few times and resumed, since I was using PLEX 5- When the Sync reached 60%-80% I noticed Drive X is used 90% but with No data in it ! even the share shows No Data .. 2nd share seems hidden/deleted (I'm sure the share was accessible after starting the sync). Now the sync finished .. and I can't find the files .. what to do ?? the drive shows used 90% with 0 data .. Quote Link to comment
JorgeB Posted July 13, 2020 Share Posted July 13, 2020 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
alhatmy Posted July 13, 2020 Author Share Posted July 13, 2020 (edited) 4 minutes ago, johnnie.black said: Please post the diagnostics: Tools -> Diagnostics Attached, Drive 10 - 2YK9ZWBD tower-diagnostics-20200713-2020.zip Edited July 13, 2020 by alhatmy Quote Link to comment
JorgeB Posted July 13, 2020 Share Posted July 13, 2020 You need to check filesystem on disk10, but note that a new config it's not usually the way to fix a disable disk, though in this case it should be OK since the disk looks healthy. Quote Link to comment
alhatmy Posted July 13, 2020 Author Share Posted July 13, 2020 2 minutes ago, johnnie.black said: You need to check filesystem on disk10, but note that a new config it's not usually the way to fix a disable disk, though in this case it should be OK since the disk looks healthy. Thanks ... Just to confirm, is it more safer to stop the array and use that drive a unassigned just to copy all important files ? or this might damage more .. Quote Link to comment
JorgeB Posted July 13, 2020 Share Posted July 13, 2020 When a drive gets disable you usually replace it with a new one or rebuild on top in case it looks like a connection issue, in either case there's no need to remove it from the array, all data will still be emulated by parity and accessible during the rebuild. Quote Link to comment
alhatmy Posted July 13, 2020 Author Share Posted July 13, 2020 (edited) ok so I checked the filesystem, didn't show errors .. so I removed that drive and replace with a new .... it seems some shares still not showing in shares page! Is there a way to bring it back? I have a backup from the flash (usb) .. Edited July 13, 2020 by alhatmy Quote Link to comment
alhatmy Posted July 13, 2020 Author Share Posted July 13, 2020 3 hours ago, johnnie.black said: You need to check filesystem on disk10, but note that a new config it's not usually the way to fix a disable disk, though in this case it should be OK since the disk looks healthy. Was able to fix the drive (while it's unassigned drive), and the new drive still building but (shares are still missing). I'll just hope if someone can advice me if I can bring shares back ........... plz Quote Link to comment
alhatmy Posted July 13, 2020 Author Share Posted July 13, 2020 The shares still found in flash backup compressed (\config\shares), but not showing in /mnt/user/ ... Parity-Sync/Data-Rebuild in progress - 28 hours to finish, is there any chance it'll come back? or it's impossible, just create new ? Quote Link to comment
trurl Posted July 14, 2020 Share Posted July 14, 2020 3 hours ago, alhatmy said: Was able to fix the drive (while it's unassigned drive), and the new drive still building but (shares are still missing). I'll just hope if someone can advice me if I can bring shares back ........... plz Unassigned drives are not part of user shares, so if you did succeed in repairing the filesystem as Unassigned then maybe the files are there. You really should have repaired the emulated disk in the array before rebuilding. Expect the rebuild to be unmountable since the emulated disk wasn't repaired. Quote Link to comment
trurl Posted July 14, 2020 Share Posted July 14, 2020 After rebuild you can repair the filesystem on the rebuild and maybe all will be good. Quote Link to comment
alhatmy Posted July 14, 2020 Author Share Posted July 14, 2020 6 hours ago, trurl said: Unassigned drives are not part of user shares, so if you did succeed in repairing the filesystem as Unassigned then maybe the files are there. You really should have repaired the emulated disk in the array before rebuilding. Expect the rebuild to be unmountable since the emulated disk wasn't repaired. yes I found all files. and I'll check the filesystem once done ..... thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.