July 19, 20205 yr I received a notification that my second parity drive was disabled. It also had a couple of hundred errors in the "Error" column. Parity check last night returned no problems. Finally had a chance to shut down the machine and check the cables. Everything appears fine with those. Restarted the server and the drive continues to show as disabled. I then ran a SMART test and downloaded a diagnostics report, which I have attached. Any help/guidance would be appreciated, thanks! albus-diagnostics-20200719-1402.zip albus-smart-20200719-1349.zip
July 19, 20205 yr Community Expert The drive will continue to show as disabled until you take corrective action as discussed here.
July 19, 20205 yr Author Ok yeah, I thought we were heading in that direction... I'm realizing I should have run the diagnostics prior to restarting everything. Any chance anyone can tell what happened to the drive based on the diagnostics and/or SMART test I attached? Thank you!
July 20, 20205 yr Community Expert 8 hours ago, MixMaster5001 said: Any chance anyone can tell what happened to the drive based on the diagnostics Diags are after rebooting so we can't see what happened but SMART looks fine, most likely not a disk problem, you can replace/swap cables to rule them out in case it happens again.
Archived
This topic is now archived and is closed to further replies.