Hey guys,

 

Yesterday I built my new machine with an AMD Ryzen7 CPU and a ROG Strix B550 -F Mainboard.

I configured the BIOS as written in the Unraid-Manual, but when I boot up Unraid it says:

 

IPv4 address: not set

IPv6 address: not set

 

(Unraid Version 6.8.3)

 

Setting bonding to "no" gives me an IP with 169.xxx.xxxx.xxx, which means that the machine can't connect to my router/DHCP server.

So I tried setting a static IP, which I couldn't reach via Browser.

Also pinging e.g. the router fails in both cases.

I also made diagnostics, which are attached below.

 

P.S The Intel LAN Controller in BIOS settings is enabled (by default) if this matters.

 

• Is it possible that my router (Asus RT-AC58U) has troubles with the 2.5Gbit Ethernet Port on my mobo?
• Or maybe Unraid doesn't support the Ethernet drivers? 

 

I hope you guys can help me fixing this problem.

 

Thanks in advance :)

 

tower-diagnostics-20200727-1507.zip

Try

 

Thanks for your reply, but unfortunately it still doesn't work. (even with the 6.9.0-beta25)

I tried it once  again with DHCP and with a static IP.

In both cases it can't connect. On the router Dashboard under "Connected Devices" my machine also doesn't show up.

Diagnostics attached below.

 

I have no clue

tower-diagnostics-20200728-0148.zip

I can finally access the WebGUI.

 

The solution was:

• I switched to Unraid OS version 6.9.0-beta25 (It only works with this version in my case)
• I reset my router and tweaked some settings
• I switched to another RJ-45 cable and
• I used a static IP address

Thank you @jonathanm for the tip with the beta version