Possible drive failure? "Device is disabled, contents emulated"


Recommended Posts

Hi all,

 

I have a quick question... I hope. I recently had a drive display this message "Device is disabled, contents emulated", and I found this post letting me know I was a Ninny for trying trying the old restart to fix it trick.... Alas, following that post, I rebuilt the drive back into the array and am posting a copy of the SMART diagnostics here to see if anyone sees any warning signs of failure? (also to note, the server was in a hot closet for awhile, out now, so I'm wondering if that caused some bit errors...)

 

Any help much appreciated!

Josh

 

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.56-Unraid] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD80EFAX-68LHPN0
Serial Number:    7SGTL7KC
LU WWN Device Id: 5 000cca 252cb2d64
Firmware Version: 83.H0A83
User Capacity:    8,001,563,222,016 bytes [8.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Aug  1 19:26:20 2020 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   93) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 974) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   016    -    0
  2 Throughput_Performance  --S---   129   129   054    -    112
  3 Spin_Up_Time            POS---   166   166   024    -    412 (Average 380)
  4 Start_Stop_Count        -O--C-   100   100   000    -    392
  5 Reallocated_Sector_Ct   PO--CK   100   100   005    -    0
  7 Seek_Error_Rate         -O-R--   100   100   067    -    0
  8 Seek_Time_Performance   --S---   128   128   020    -    18
  9 Power_On_Hours          -O--C-   099   099   000    -    12382
 10 Spin_Retry_Count        -O--C-   100   100   060    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    388
 22 Helium_Level            PO---K   100   100   025    -    100
192 Power-Off_Retract_Count -O--CK   088   088   000    -    14782
193 Load_Cycle_Count        -O--C-   088   088   000    -    14782
194 Temperature_Celsius     -O----   151   151   000    -    43 (Min/Max 17/63)
196 Reallocated_Event_Count -O--CK   100   100   000    -    0
197 Current_Pending_Sector  -O---K   100   100   000    -    0
198 Offline_Uncorrectable   ---R--   100   100   000    -    0
199 UDMA_CRC_Error_Count    -O-R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      1  Comprehensive SMART error log
0x03       GPL     R/O      1  Ext. Comprehensive SMART error log
0x04       GPL     R/O    256  Device Statistics log
0x04       SL      R/O    255  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL     R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x0c       GPL     R/O   5501  Pending Defects log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x12       GPL     R/O      1  SATA NCQ Non-Data log
0x13       GPL     R/O      1  SATA NCQ Send and Receive log
0x15       GPL,SL  R/W      1  Rebuild Assist log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x24       GPL     R/O    256  Current Device Internal Status Data log
0x25       GPL     R/O    256  Saved Device Internal Status Data log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                    43 Celsius
Power Cycle Min/Max Temperature:     40/47 Celsius
Lifetime    Min/Max Temperature:     17/63 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/65 Celsius
Min/Max Temperature Limit:           -40/70 Celsius
Temperature History Size (Index):    128 (86)

Index    Estimated Time   Temperature Celsius
  87    2020-08-01 17:19    46  ***************************
 ...    ..( 34 skipped).    ..  ***************************
 122    2020-08-01 17:54    46  ***************************
 123    2020-08-01 17:55    47  ****************************
 124    2020-08-01 17:56    46  ***************************
 125    2020-08-01 17:57    47  ****************************
 126    2020-08-01 17:58    46  ***************************
 127    2020-08-01 17:59    46  ***************************
   0    2020-08-01 18:00    46  ***************************
   1    2020-08-01 18:01    47  ****************************
   2    2020-08-01 18:02    46  ***************************
   3    2020-08-01 18:03    47  ****************************
   4    2020-08-01 18:04    46  ***************************
 ...    ..(  2 skipped).    ..  ***************************
   7    2020-08-01 18:07    46  ***************************
   8    2020-08-01 18:08    47  ****************************
 ...    ..(  3 skipped).    ..  ****************************
  12    2020-08-01 18:12    47  ****************************
  13    2020-08-01 18:13    46  ***************************
 ...    ..( 10 skipped).    ..  ***************************
  24    2020-08-01 18:24    46  ***************************
  25    2020-08-01 18:25    45  **************************
 ...    ..(  6 skipped).    ..  **************************
  32    2020-08-01 18:32    45  **************************
  33    2020-08-01 18:33    44  *************************
 ...    ..( 20 skipped).    ..  *************************
  54    2020-08-01 18:54    44  *************************
  55    2020-08-01 18:55    43  ************************
 ...    ..( 29 skipped).    ..  ************************
  85    2020-08-01 19:25    43  ************************
  86    2020-08-01 19:26    46  ***************************

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4             388  ---  Lifetime Power-On Resets
0x01  0x010  4           12382  ---  Power-on Hours
0x01  0x018  6     52697857263  ---  Logical Sectors Written
0x01  0x020  6        41209799  ---  Number of Write Commands
0x01  0x028  6    664464018298  ---  Logical Sectors Read
0x01  0x030  6      1123841560  ---  Number of Read Commands
0x01  0x038  6     44575781150  ---  Date and Time TimeStamp
0x03  =====  =               =  ===  == Rotating Media Statistics (rev 1) ==
0x03  0x008  4           10337  ---  Spindle Motor Power-on Hours
0x03  0x010  4           10337  ---  Head Flying Hours
0x03  0x018  4           14782  ---  Head Load Events
0x03  0x020  4               0  ---  Number of Reallocated Logical Sectors
0x03  0x028  4         4736356  ---  Read Recovery Attempts
0x03  0x030  4               0  ---  Number of Mechanical Start Failures
0x04  =====  =               =  ===  == General Errors Statistics (rev 1) ==
0x04  0x008  4               0  ---  Number of Reported Uncorrectable Errors
0x04  0x010  4               4  ---  Resets Between Cmd Acceptance and Completion
0x05  =====  =               =  ===  == Temperature Statistics (rev 1) ==
0x05  0x008  1              43  ---  Current Temperature
0x05  0x010  1              44  N--  Average Short Term Temperature
0x05  0x018  1              44  N--  Average Long Term Temperature
0x05  0x020  1              63  ---  Highest Temperature
0x05  0x028  1              17  ---  Lowest Temperature
0x05  0x030  1              59  N--  Highest Average Short Term Temperature
0x05  0x038  1              25  N--  Lowest Average Short Term Temperature
0x05  0x040  1              57  N--  Highest Average Long Term Temperature
0x05  0x048  1              25  N--  Lowest Average Long Term Temperature
0x05  0x050  4               0  ---  Time in Over-Temperature
0x05  0x058  1              65  ---  Specified Maximum Operating Temperature
0x05  0x060  4               0  ---  Time in Under-Temperature
0x05  0x068  1               0  ---  Specified Minimum Operating Temperature
0x06  =====  =               =  ===  == Transport Statistics (rev 1) ==
0x06  0x008  4               5  ---  Number of Hardware Resets
0x06  0x010  4               1  ---  Number of ASR Events
0x06  0x018  4               0  ---  Number of Interface CRC Errors
0xff  =====  =               =  ===  == Vendor Specific Statistics (rev 1) ==
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c)
No Defects Logged

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            6  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            5  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

 

Link to comment

Lots of errors in syslog from this device:

Jul 31 13:04:02 Tower kernel: sr 10:0:0:0: [sr0] tag#5 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Jul 31 13:04:02 Tower kernel: sr 10:0:0:0: [sr0] tag#5 Sense Key : 0x5 [current] 
Jul 31 13:04:02 Tower kernel: sr 10:0:0:0: [sr0] tag#5 ASC=0x64 ASCQ=0x0 
Jul 31 13:04:02 Tower kernel: sr 10:0:0:0: [sr0] tag#5 CDB: opcode=0x28 28 00 00 00 00 01 00 00 01 00
Jul 31 13:04:02 Tower kernel: print_req_error: I/O error, dev sr0, sector 4

Any idea what that's about? I don't think it is a disk.

 

SMART for disk2 looks OK, but it is showing as still disabled in those diagnostics. They are a few days old though. You said you rebuilt?

 

Also those diagnostics are with the array not started, so there are some things they don't tell us, but nothing related to your question.

Link to comment
43 minutes ago, joshp said:

I'm unsure what that device is honestly, how would I figure that out?

Google seems to suggest it is DVD.

 

45 minutes ago, joshp said:

the disk went down again

SMART for disk2 is missing in those diagnostics and syslog suggests connection issue. Emulated disk is mounted though so would expect rebuild to be OK if you fix your connection issue.

 

Looks like you have Marvell controller. Lots of reports of problems with those on Linux. But some people have success with those if they disable IOMMU in BIOS. Do you have any VMs that require passthru?

 

Why have you given 100G to docker.img? 20G should be more than enough and if you fill that you have some application misconfigured.

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.