NINJA-468 Posted August 2, 2020 Share Posted August 2, 2020 Hi, i have been having issues recently with Unraid but im not sure what has changed, as its been crashing with or no reason i can see, i have re-seated the ram, and checked all cables and PSU, and am not seeing machine errors, but i cannot figure out what is causing my server to crash, would anyone be able to take a look at the attached Sys Log, and the diagnosis are from after i rebooted it as im unable to access it anyway after it crashes, thanks another thing is after each reboot parity check is required but it normally makes it thought the 6 hour check then chraches after that? Version: 6.8.3 poseidon-diagnostics-20200802-1722.zip syslog Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 Also, your appdata and system shares have files on the array instead of all on cache. This often happens when you enable dockers/VMs before installing cache. Parity updates will affect docker/VM performance, and dockers/VMs will keep array disk spunup since they will have open files in system and appdata. You can't move open files so you would have to disable docker and VM services in Settings before you could move those to cache, or get mover to move them since they are cache-prefer. Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 5 minutes ago, trurl said: Also, your appdata and system shares have files on the array instead of all on cache. This often happens when you enable dockers/VMs before installing cache. Parity updates will affect docker/VM performance, and dockers/VMs will keep array disk spunup since they will have open files in system and appdata. You can't move open files so you would have to disable docker and VM services in Settings before you could move those to cache, or get mover to move them since they are cache-prefer. thanks for the infomation, sorry but how would i go about moving appdata and system files from the array to cache and see what files they are, and is there a way to stop files from going to the array in future as i can only think of excluding the array disk in the share settings thanks again Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 2 minutes ago, NINJA-468 said: thanks for the infomation, sorry but how would i go about moving appdata and system files from the array to cache and see what files they are, and is there a way to stop files from going to the array in future as i can only think of excluding the array disk in the share settings thanks again Since these shares are cache-prefer (by default) new files will always go to cache if there is room. But if 14 minutes ago, trurl said: you enable dockers/VMs before installing cache they have to go to the array. Since these are cache-prefer shares mover will try to move them to cache, but 16 minutes ago, trurl said: can't move open files so you would have to disable docker and VM services in Settings then go to Main - Array Operations and Move Now. Also, mover will not move duplicates, so post new diagnostics when it completes so we can see if there is anything else that needs to be cleaned up 1 Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 Hi thanks i have disabled the docker and VM was already off, have ran the mover and enabled docker again, sys log and diagnostics attached thanks. poseidon-diagnostics-20200802-1806.zip syslog Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 7 minutes ago, NINJA-468 said: sys log and diagnostics attached thanks. Diagnostics already includes syslog. The only time we might want a separate syslog is if you have Syslog Server enabled to get us syslog from before a crash. appdata is all on cache now, but system still has files on disk1. 9 minutes ago, NINJA-468 said: disabled the docker Do you mean disabled the docker container you had running, or do you mean you disabled the docker service in Settings - Docker? The service must be disabled to move system. What do you get from the command line with ls -lah /mnt/disk1/system and ls -lah /mnt/cache/system Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 15 minutes ago, trurl said: Do you mean disabled the docker container you had running, or do you mean you disabled the docker service in Settings - Docker? The service must be disabled to move system. I disabled the docker service in settings. 16 minutes ago, trurl said: ls -lah /mnt/disk1/system root@Poseidon:~# ls -lah /mnt/disk1/system total 0 drwxrwxrwx 4 nobody users 47 Jun 3 17:30 ./ drwxrwxrwx 7 nobody users 103 Aug 1 22:30 ../ drwxrwxrwx 2 nobody users 32 Aug 1 22:30 docker/ drwxrwxrwx 2 nobody users 33 May 19 11:54 libvirt/ 17 minutes ago, trurl said: ls -lah /mnt/cache/system root@Poseidon:~# ls -lah /mnt/cache/system total 16K drwxrwxrwx 1 nobody users 12 May 19 11:54 ./ drwxrwxrwx 1 nobody users 40 Aug 1 22:21 ../ drwxrwxrwx 1 nobody users 20 May 19 11:54 docker/ Thanks Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 Just now, trurl said: Do you have any VMs? No and dont have the service enabled either, thanks Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 Go to Settings - Docker, disable, then delete docker image from that same page. Do the same for Settings - VM Manager. Don't enable either for now. Then post the results of 59 minutes ago, trurl said: ls -lah /mnt/disk1/system and ls -lah /mnt/cache/system Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 6 minutes ago, trurl said: Go to Settings - Docker, disable, then delete docker image from that same page. Do the same for Settings - VM Manager. Don't enable either for now. i have done this for Docker but VM manager tab says; "Your hardware does not have Intel VT-x or AMD-V capability. This is required to create VMs in KVM. Please disable the VM function" i dont belive i have it enabled in bios as i dont use VM's 9 minutes ago, trurl said: Don't enable either for now. neither are enabled 8 minutes ago, trurl said: ls -lah /mnt/disk1/system root@Poseidon:~# ls -lah /mnt/disk1/system total 0 drwxrwxrwx 4 nobody users 47 Jun 3 17:30 ./ drwxrwxrwx 7 nobody users 103 Aug 1 22:30 ../ drwxrwxrwx 2 nobody users 32 Aug 1 22:30 docker/ drwxrwxrwx 2 nobody users 33 May 19 11:54 libvirt/ 8 minutes ago, trurl said: ls -lah /mnt/cache/system root@Poseidon:~# ls -lah /mnt/cache/system total 16K drwxrwxrwx 1 nobody users 12 May 19 11:54 ./ drwxrwxrwx 1 nobody users 40 Aug 1 22:21 ../ drwxrwxrwx 1 nobody users 0 Aug 2 19:27 docker/ Thanks Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 Not sure how you ever got libvirt created then. Do you know how to work directly with the disk files and folders at the command line or with mc (Midnight Commander) or Krusader? Basically you need to get rid of the system folder on disk1. Quote Link to comment
trurl Posted August 2, 2020 Share Posted August 2, 2020 Sorry, of course you can't work with Krusader with docker disabled Just go to the command line and rm -R /mnt/disk1/system Then go to Settings - Docker and enable dockers. Then the Previous Apps feature will reinstall your dockers exactly as they were. Quote Link to comment
NINJA-468 Posted August 2, 2020 Author Share Posted August 2, 2020 Thanks so much for the help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.