StevenD Posted October 18, 2013 Author Share Posted October 18, 2013 I have the same case and am using the stock fans, but converted them from 12v to 5v to really cut down the volume. After reading your post earlier this morning, I thought I would try that. The fans would not start. Quote Link to comment
smakovits Posted October 19, 2013 Share Posted October 19, 2013 Are you talking about the stock ones? All I did was take a normal 4 pin molex for fans and flipped all the wires. So the 2 fan writes switch sides. To be on the 5v half of the 4 pin molex if that makes sense So not connected to the mobo like I think you were Quote Link to comment
StevenD Posted October 19, 2013 Author Share Posted October 19, 2013 Are you talking about the stock ones? All I did was take a normal 4 pin molex for fans and flipped all the wires. So the 2 fan writes switch sides. To be on the 5v half of the 4 pin molex if that makes sense So not connected to the mobo like I think you were No, I swapped the red and yellow wires on the stock fan and plugged it into the motherboard. Quote Link to comment
smakovits Posted October 19, 2013 Share Posted October 19, 2013 That might be the issue, I think you need the negative wires switched too. I used the image here to make my conversion: http://www.quietpc.com/zm-mc1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.