Ken R. Posted August 7, 2020 Share Posted August 7, 2020 (edited) This machine is to take some of the load off of my existing (2 Parity 44tb, i7-920, P6X58D MB, 18 gig ram) unraid server of about 10 years now. The plan is to add drives as needed, I'll start with the 8tb exos seagates. I don't run much, it's a headless box that will just run a few dockers (Medusa/SAB/plex/ESPHome, maybe a VM or two but no gaming or such. I would need to pass through things like USB. I might retire another machine and run a light weight windows VM too which would need a GPU passthrough. Here is a link to https://pcpartpicker.com/list/Q6tYvW Any thoughts? Oh two cases listed in there, not sure which I'd go with yet. I'll add SATA cards as needed once I exceed the MB SATA. It would be nice to watch a stream, download and post process at the same time - something I could never do on the other machine (had to pause DL while PP or the stream would buffer) Thanks, Edited August 7, 2020 by Ken R. Quote Link to comment
Ken R. Posted August 9, 2020 Author Share Posted August 9, 2020 (edited) So I can't seem to source ECC ram , even dropping down to 16gb, so is there any reason to go with the Intel Xeon E-2146G or should I just jump to a eq gaming rig board and i7-8700? Edited August 9, 2020 by Ken R. Quote Link to comment
Energen Posted August 9, 2020 Share Posted August 9, 2020 (edited) Where are you looking for ECC? Because it's everywhere........ Looks like a good build.. you probably don't need a 750W power supply though, cost wise might not make much of a difference to get a lower wattage one but 750 is probably overkill. You may not be concerned about it, but the board has no IPMI. It's like half a server board and half a consumer board. Like it can't make up it's mind what it wants to be. You may not want or need IPMI, but .... if so... Edited August 9, 2020 by Energen Quote Link to comment
Ken R. Posted August 10, 2020 Author Share Posted August 10, 2020 (edited) Kingston ValueRAM 32 GB (2x16) was the only ram I saw on PCPart Picker and none for 16 gb (2x8) - I did not dig any deeper, just assumed its a covid thing. No, your right, IPMI was not a consideration. I sized the PWR supply assuming 14 drives and a dedicated GPU just in case, again, the selection was not great. Edited August 10, 2020 by Ken R. Quote Link to comment
ChatNoir Posted August 10, 2020 Share Posted August 10, 2020 I used https://www.memorycow.co.uk/ for my memory. Good service and good price. Very useful search feature based on the hardware used. Not sure if they deliver where you are though. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.