Seruschl Posted August 8, 2020 Share Posted August 8, 2020 (edited) Hi guys. I will move my data and my hdd's from my unraid build to my 4bay Synology NAS but i don't really know how i can so ist properly. So in my unraid build i have an Array with 1x 12TB, 2x 4TB, 2x 2TB hdd's without an parity disk. Almost 90% of my data ist in the 12TB Disk and is currently moving to an 12TB disk in my NAS. When all the Data is moved i wanted to remove the 12TB from the array to add It to my NAS and then move the last data from the both 4TB disks. Can i stop the array, remove the 12TB Disk and then start the array again to move the other Data from the last disks? I am not really sure how to proceed in this matter without losing my data Edited August 8, 2020 by Seruschl Quote Link to comment
trurl Posted August 8, 2020 Share Posted August 8, 2020 Since you don't have parity nothing to resync when you remove a disk. Of course you don't have any parity protection, but each data disk in Unraid is independent. Each disk can be read independently without the others. Quote Link to comment
Seruschl Posted August 8, 2020 Author Share Posted August 8, 2020 That is an information that sounds good so far. So when I remove the 12TB (disk1) I can Star the array and go on to move the other files from the 2 other disks I want to remove? I use an FileZilla Docker from unraid. How do I move the appdata files from the FileZilla container to one of the remaining disks which will stay inside so that I don‘t have any problems to start the container? Quote Link to comment
trurl Posted August 8, 2020 Share Posted August 8, 2020 Assuming you are referencing appdata as a user share and not as a folder on a specific disk, and you move that folder from one disk to another, then the container shouldn't know the difference. For more detailed advice, post your diagnostics and the docker run command for that container. Quote Link to comment
Seruschl Posted August 8, 2020 Author Share Posted August 8, 2020 Can I read out the run command from an running container? It is the standard jlesage/filezilla container and I haven‘t changed any configuration like the appdata path which is currently /mnt/user/appdata/FileZilla So I assume that when my copying is finished i can change the container especially the appdata path to /mnt/disk5/appdata/FileZilla which will stay in the system and I can remove the other disks and start the array again and the container will also start as well. Quote Link to comment
Seruschl Posted August 9, 2020 Author Share Posted August 9, 2020 So now I wanted to remove my disks one by one but the array won‘t start because it says that too many disks are missing. How can I now proceed? Quote Link to comment
Seruschl Posted August 9, 2020 Author Share Posted August 9, 2020 Ah i think I found an solution. Will now put the last 2TB on an external drive and will then remove the hdd‘s. i guess this can be closed. Thanks for the advices Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.