indy5 Posted August 10, 2020 Share Posted August 10, 2020 Good day Unraid Community, For, for a bit of background that may have led to my current situation. I have been running a stable system for many years, gone through many drive upgrades, hardware replacements, etc. This past weekend I moved my entire system into a new case, installed a new drive controller (Adaptec 71605). After completing this process, everything was working properly, all drives detected, array started successfully. At some point after things were working, after a reboot, one of my drives went Unmountable. I started the array in maintenance mode, tried running xfs_repair via UI. The repair ran overnight and ended with a message that a Secondary Superblock could not be found. I am not sure what else to do at this point and I want to make sure that I don't disturb anything, if there's a chance I can save the data. I appreciate any help. Diagnostics are attached. diagnostics-20200810-1048.zip Quote Link to comment
JorgeB Posted August 10, 2020 Share Posted August 10, 2020 28 minutes ago, indy5 said: The repair ran overnight and ended with a message that a Secondary Superblock could not be found. That suggests a damaged superblock, connect the disk to an onboard SATA port just to make sure it's not controller related and please post xfs_repair output. Quote Link to comment
indy5 Posted August 10, 2020 Author Share Posted August 10, 2020 xfs_repair ended with: ..Sorry, could not find valid secondary superblock Exiting now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.