Morne Posted August 17, 2020 Share Posted August 17, 2020 Hi Guys and girls i need some advice if possible. I had to replace my Hard drive on the unraid because the system where saying that the drive is Faulty. I replaced the drive and put it into a other syste mand tested it and the software found now problem with it. I have replace the cabled but it still complained that the drive was pre fail. The new drive is brand-new and if i looks at the drive it also brings up pre fail why is that. Quote Link to comment
JorgeB Posted August 17, 2020 Share Posted August 17, 2020 Please post the diagnostics: Tools -> Diagnostics Quote Link to comment
testdasi Posted August 17, 2020 Share Posted August 17, 2020 Attach diagnostics in your next post (Tools -> Diagnostics -> attach full zip file). Quote Link to comment
Morne Posted August 17, 2020 Author Share Posted August 17, 2020 Thanks for the reply and thanks for the help. tower-diagnostics-20200817-1747.zip Quote Link to comment
JorgeB Posted August 17, 2020 Share Posted August 17, 2020 Disk5 looks healthy, what do you mean by this: 3 hours ago, Morne said: it still complained that the drive was pre fail. Where are you seeing the disk is failing? Quote Link to comment
Morne Posted August 18, 2020 Author Share Posted August 18, 2020 This is what i am seeing and sorry if it is not anything serous. I have removed the 3 TB drive 2 weeks ago and added this 6 TB drive that is brand new. On the 3 TB i ran some tests and it is not finding anything wrong with the drive. Quote Link to comment
JorgeB Posted August 18, 2020 Share Posted August 18, 2020 All is well, pre-fail you see is just the type of the attribute, the important part is the failed column (and the values themselves). Quote Link to comment
Morne Posted August 18, 2020 Author Share Posted August 18, 2020 Thanks that makes me feel better and once again thanks for the help. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.