littlebudha Posted August 17, 2020 Share Posted August 17, 2020 Can someone create a Template for tgorg's locast2plex docker? Also, if its possible to add built in open VPN support inside it so we can change the location of the ipAddress. I really would appreciate this! trying to set it up through dockerhub, but I think lots of people will find this container VERY useful! 3 Quote Link to comment
vehmeier Posted August 17, 2020 Share Posted August 17, 2020 I tried to get locast2plex to work on my server with no luck. I too would appreciate a simple way to set it up or a youtube video with step by step instructions. 1 Quote Link to comment
Cynagen Posted August 18, 2020 Share Posted August 18, 2020 (edited) On 8/17/2020 at 6:35 AM, littlebudha said: Can someone create a Template for tgorg's locast2plex docker? Also, if its possible to add built in open VPN support inside it so we can change the location of the ipAddress. I really would appreciate this! trying to set it up through dockerhub, but I think lots of people will find this container VERY useful! I would say no on the OpenVPN support built-in as that's opening a whole extra can of worms that can be easily accomplished using a router such as pfSense. You can assign a docker an individual IP address, and in <insert preferred OSS routing platform>, initiate the VPN connection, and then set up rules to route all of it's traffic requests out that VPN gateway instead, getting the same effect, without the added complexities to the docker. I have found a way to get Locast2Plex working under unRAID's docker successfully! You'll need Community Apps plugin, and in it's settings, enable searching dockerHub for additional content. Go to Community Apps, search for "locast2plex", it'll return no results, but there'll be a link to Search dockerHub, click it. We'll be installing tgorg's version here (should be first one to come up). You'll need to define the docker template by hand here following this guide; Set Network Type to Custom: br0 (we need to assign this Docker it's own IP, the cross-docker port access does not work correctly), set an unused local IP address in your network, remember this IP address, we need it later. I also set my copy of this image to Privileged, though I'm not sure it's fully required in this instance. These steps below no longer appear to be valid, please read 2nd page of this thread for more information! Add Variable, Name "Locast Username", Key: "username", Value: (Your Locast.org login email) Add Variable, Name "Locast Password", Key: "password", Value: (Your Locast.org login password) Add Port, Name "Discovery Port", Host Port: 6077, Connection Type: TCP, Description: "TCP HomeRun Discovery Port" Add Port, Name "Service Port", Host Port: 1900, Connection Type: UDP, Description: "MPEG Transport Service Port" Add Variable, Name "External Address", Key: "external_addy", Value: (The custom IP address you assigned earlier) Add Variable, Name "External Port", Key: "external_port", Value: 6077 Add Variable, Name "Enable Debug", Key: "debug", Value: "yes" After building the container and firing up, you should be able to hit the IP on port 6077 in a browser (http://192.168.X.X:6077/) and get a quick XML file defining an emulated HDHomeRun device. This means we should be able to do a search in Plex to find it successfully, though you may need to use the IP and port to define the tuner manually if the automatic search does not discover it. Otherwise, everything's working as expected, coming through quick and easy, my guide is already filled and ready to go (about 60 channels in my area). Good luck everyone! Edited September 1, 2020 by Cynagen 2 3 Quote Link to comment
camf1217 Posted August 18, 2020 Share Posted August 18, 2020 I was able to build the container and get the XML page, but plex cant see it. When i look at the logs i see the error " ERROR:root:'ascii' codec can't decode byte 0xec in position 308: ordinal not in range(128) " any ideas/suggestions? Quote Link to comment
Cynagen Posted August 19, 2020 Share Posted August 19, 2020 (edited) 1 hour ago, camf1217 said: I was able to build the container and get the XML page, but plex cant see it. When i look at the logs i see the error " ERROR:root:'ascii' codec can't decode byte 0xec in position 308: ordinal not in range(128) " any ideas/suggestions? I don't have any suggestions, sorry. If you're saying the Auto-discovery can't find it, that happens. Use the option to provide the address manually. Same address you visited in the browser to verify the XML page showing. Edited August 19, 2020 by Cynagen Additional possible helpful information, not enough context? Quote Link to comment
K1ng0011 Posted August 19, 2020 Share Posted August 19, 2020 I am new to unraid but I just saw this post so I thought I would give it a shot to see if I could get it to work. I am happy to report I did get it to work. I was having issues making my docker containers connect to each other (ping). I ended up setting the locast2plex docker container network type to "Host" and I got it to work. However if I end up having issues with that the thread below seems to have a solution to why my plex and locast2plex containers cannot connect to each other. Quote Link to comment
gacpac Posted August 19, 2020 Share Posted August 19, 2020 You didn't read the whole post. Go to docker settings, hit advanced and there's an option to allow dockers to host networks, they will be able to ping each other. 1 Quote Link to comment
snappertom Posted August 20, 2020 Share Posted August 20, 2020 (edited) I have followed the instructions outlined above however the docker wont start, do you need to donate to locast for this to work? log output below UPDATE - I have since found out a free account on Locast won’t work with locast2plex Locast2Plex v0.4.2 Traceback (most recent call last): File "/app/main.py", line 320, in <module> DEBUG MODE ACTIVE UUID found. UUID set to: hmwhuwux... Logging into Locast using username [email protected]... Validating User Info... User Info obtained. User didDonate: False if (not locast.login(CONFIG_LOCAST_USERNAME, CONFIG_LOCAST_PASSWORD)) or (not locast.validate_user()): File "/app/LocastService.py", line 85, in validate_user print("User donationExpire: " + str(userRes['donationExpire'] / 1000)) TypeError: unsupported operand type(s) for /: 'NoneType' and 'int' Edited August 20, 2020 by snappertom Quote Link to comment
ppunraid Posted August 20, 2020 Share Posted August 20, 2020 Not getting as far as @snappertom. But just wanted to test this before setting up a donation. Locast2Plex v0.4.2 DEBUG MODE ACTIVE UUID found. UUID set to: hmwhuwux... Logging into Locast using username [email protected]... Error during login: [Errno -3] Try again Exiting... Locast2Plex v0.4.2 Locast2Plex v0.4.2 DEBUG MODE ACTIVE UUID found. UUID set to: hmwhuwux... Logging into Locast using username [email protected]... Error during login: [Errno -3] Try again Exiting... I have special characters in my password, so I tried breaks and with quotes, but still no luck. Also, I can't seem to find the appdata folder. Is this stored somewhere else? Quote Link to comment
Cynagen Posted August 20, 2020 Share Posted August 20, 2020 (edited) You must subscribe to Locast before you can set up this docker unfortunately. (Err logging in) Additionally, there is no appdata folder that I'm aware of, all the required variables are set through docker template environment variables as outlined. Edited August 20, 2020 by Cynagen Quote Link to comment
ppunraid Posted August 21, 2020 Share Posted August 21, 2020 Finally got this working! Had some personal issues I had to deal with, such as I forgot I only allow certain ip's through my FW (DOH!) after doing some tcpdumps and some reading...I didn't know that the unraid server couldn't talk to the VM's directly... Thanks for the setup! Quote Link to comment
littlebudha Posted August 21, 2020 Author Share Posted August 21, 2020 On 8/18/2020 at 5:15 PM, Cynagen said: I would say no on the OpenVPN support built-in as that's opening a whole extra can of worms that can be easily accomplished using a router such as pfSense. You can assign a docker an individual IP address, and in <insert preferred OSS routing platform>, initiate the VPN connection, and then set up rules to route all of it's traffic requests out that VPN gateway instead, getting the same effect, without the added complexities to the docker. I have found a way to get Locast2Plex working under unRAID's docker successfully! You'll need Community Apps plugin, and in it's settings, enable searching dockerHub for additional content. Go to Community Apps, search for "locast2plex", it'll return no results, but there'll be a link to Search dockerHub, click it. We'll be installing tgorg's version here (should be first one to come up). You'll need to define the docker template by hand here following this guide; Set Network Type to Custom: br0 (we need to assign this Docker it's own IP, the cross-docker port access does not work correctly), set an unused local IP address in your network, remember this IP address, we need it later. I also set my copy of this image to Privileged, though I'm not sure it's fully required in this instance. Add Variable, Name "Locast Username", Key: "username", Value: (Your Locast.org login email) Add Variable, Name "Locast Password", Key: "password", Value: (Your Locast.org login password) Add Port, Name "Discovery Port", Host Port: 6077, Connection Type: TCP, Description: "TCP HomeRun Discovery Port" Add Port, Name "Service Port", Host Port: 1900, Connection Type: UDP, Description: "MPEG Transport Service Port" Add Variable, Name "External Address", Key: "external_addy", Value: (The custom IP address you assigned earlier) Add Variable, Name "External Port", Key: "external_port", Value: 6077 Add Variable, Name "Enable Debug", Key: "debug", Value: "yes" After building the container and firing up, you should be able to hit the IP on port 6077 in a browser (http://192.168.X.X:6077/) and get a quick XML file defining an emulated HDHomeRun device. This means we should be able to do a search in Plex to find it successfully, though you may need to use the IP and port to define the tuner manually if the automatic search does not discover it. Otherwise, everything's working as expected, coming through quick and easy, my guide is already filled and ready to go (about 60 channels in my area). Good luck everyone! Thank you very much for this! I got my Locast2Plex to work with these instructions! Quote Link to comment
littlebudha Posted August 21, 2020 Author Share Posted August 21, 2020 So those of you who live in an area where locast is not available you can follow these instructions to route your locast traffic through a Docker container with VPN built in already: - I used the excellent instructions by @Cynagen to get my locast2Plex setup - I then used the instructions provided by @SpaceInvaderOne to route traffic through a container already having VPN built in. i used the binhex-delugevpn, but you can use any container you want. Instructions for this are available as a video on : https://www.youtube.com/watch?v=5AEzm5y2EvM and https://www.youtube.com/watch?v=znSu_FuKFW0&t=457s - once the VPN container is created and working, make sure the traffic is going through the VPN, Make sure the VPN server is located in the market that locast is available. I used PIA and Atlanta as the server. then add following ports to this container: Name: locast2plex , Host Port: 6077, connection type : TCP Name: Locast2Plex service Port: Host Port: 1900, connection type: TCP - Start this VPN container - then follow the instructions provide above by @Cynagen with the following modifications: in the locast2plex container, make sure and choose Advanced configuration under extra parameters add: --net=container:binhex-delugevpn ( or any name of the VPN container you chose) Network must be NONE External Address is the address of the VPN containers IP address ( In mycase its the delugeVPN container address) I had to keep Priviladged OFF, but not sure if required rest of the settings are same @Cynagen start the container and under the log it should start up normally if everything is correct. You do need to donate to locast to make this work in plex Live TV and DVR you would add the IP address of your VPN container with port 6077 choose the zipcode of the market you chose for me it was atlanta, and the EPG has an option for Locast OTA data. ENJOY! 1 Quote Link to comment
ppunraid Posted August 21, 2020 Share Posted August 21, 2020 @littlebudha, good Idea about sending it through a VPN. Didn't think about that. Quote Link to comment
strid3r21 Posted August 22, 2020 Share Posted August 22, 2020 (edited) 13 hours ago, littlebudha said: So those of you who live in an area where locast is not available you can follow these instructions to route your locast traffic through a Docker container with VPN built in already: - I used the excellent instructions by @Cynagen to get my locast2Plex setup - I then used the instructions provided by @SpaceInvaderOne to route traffic through a container already having VPN built in. i used the binhex-delugevpn, but you can use any container you want. Instructions for this are available as a video on : https://www.youtube.com/watch?v=5AEzm5y2EvM and https://www.youtube.com/watch?v=znSu_FuKFW0&t=457s - once the VPN container is created and working, make sure the traffic is going through the VPN, Make sure the VPN server is located in the market that locast is available. I used PIA and Atlanta as the server. then add following ports to this container: Name: locast2plex , Host Port: 6077, connection type : TCP Name: Locast2Plex service Port: Host Port: 1900, connection type: TCP - Start this VPN container - then follow the instructions provide above by @Cynagen with the following modifications: in the locast2plex container, make sure and choose Advanced configuration under extra parameters add: --net=container:binhex-delugevpn ( or any name of the VPN container you chose) Network must be NONE External Address is the address of the VPN containers IP address ( In mycase its the delugeVPN container address) I had to keep Priviladged OFF, but not sure if required rest of the settings are same @Cynagen start the container and under the log it should start up normally if everything is correct. You do need to donate to locast to make this work in plex Live TV and DVR you would add the IP address of your VPN container with port 6077 choose the zipcode of the market you chose for me it was atlanta, and the EPG has an option for Locast OTA data. ENJOY! ive tried this over and over and keep getting an error in the locast2plex container when i add these options. it throws a "Container cannot be connected to network endpoints: container:sabnzbdvpn, none." and deletes the container. ive tried deluge vpn as well with the same issue. any idea what could be the issue? Edited August 22, 2020 by strid3r21 additional info Quote Link to comment
littlebudha Posted August 22, 2020 Author Share Posted August 22, 2020 9 hours ago, strid3r21 said: ive tried this over and over and keep getting an error in the locast2plex container when i add these options. it throws a "Container cannot be connected to network endpoints: container:sabnzbdvpn, none." and deletes the container. ive tried deluge vpn as well with the same issue. any idea what could be the issue? Did you follow the instructions from Spaceinvaders youtube video to make sure you have the initial setup working ( ) once you get this working, follow above instructions. Quote Link to comment
strid3r21 Posted August 22, 2020 Share Posted August 22, 2020 5 hours ago, littlebudha said: Did you follow the instructions from Spaceinvaders youtube video to make sure you have the initial setup working ( ) once you get this working, follow above instructions. welp, im a moron. i was on unraid 6.8.2 and not 6.8.3. i thought i had updated to 6.8.3 already, but obviously i did not. so i got it working sort of. locast2plex runs through the vpn container now, but i dont get an XML file when i connect to the 192.168.X.X:6077 this is the log file that locast2plex spits out. its showing running a server on 0.0.0.0:6077? shouldnt that say 192.168.0.X:6077? Quote ............. Getting user's media market (DMA)... DMA found as 602 Getting list of stations based on DMA... Loading FCC Stations list... Starting device server on 0.0.0.0:6077 Starting SSDP server... Quote Link to comment
strid3r21 Posted August 22, 2020 Share Posted August 22, 2020 15 minutes ago, strid3r21 said: welp, im a moron. i was on unraid 6.8.2 and not 6.8.3. i thought i had updated to 6.8.3 already, but obviously i did not. so i got it working sort of. locast2plex runs through the vpn container now, but i dont get an XML file when i connect to the 192.168.X.X:6077 this is the log file that locast2plex spits out. its showing running a server on 0.0.0.0:6077? shouldnt that say 192.168.0.X:6077? moron again. i forgot to set the network in my VPN container to Bro. once i switched that. gave it a unique ip address different from my unraid box. and then put that ip in the external ip address field in the locast2plex field. it works as intended! thanks for putting these guides together, even tho i have a difficult time following them apparently lol. Quote Link to comment
K1ng0011 Posted August 24, 2020 Share Posted August 24, 2020 If you run this locast2plex docker through Ad Guard-Home docker it will prevent the docker from starting. Some part of DNS resolution in the geolocation process is being blocked via the Ad Guard-Home docker. I had to go into Ad Guard and stop it temporarily until the docker has finished booting then works fine. I have not figured out the domain it is reaching out to yet. Locast2Plex v0.4.2 DEBUG MODE ACTIVE UUID found. UUID set to: hmwhuwux... Logging into Locast using username Validating User Info... User Info obtained. User didDonate: True User donationExpire: 1600482103 Getting user location... Error during geo IP acquisition: [Errno -2] Name does not resolve Exiting... Quote Link to comment
ppunraid Posted August 24, 2020 Share Posted August 24, 2020 Following up on this. How do you get to the appdata folder for this docker? I was under the impression docker containers automatically created folders within the appdata folder. I want to be able to add 4 tuners to this container. I know I could just create a second container, but I'd like to keep configurations in parity. Quote Link to comment
K1ng0011 Posted August 25, 2020 Share Posted August 25, 2020 I found someone with the same issue and the URL to whitelist get.geojs.io https://github.com/tgorgdotcom/locast2plex/issues/28 Quote Link to comment
slikone27 Posted August 25, 2020 Share Posted August 25, 2020 I followed the instructions and the xml file is fine and the guide comes up... however, i cannot get any channels to play. they just error when trying to start... this is from the logs: Aug 20, 2020 10:15:22.193 [0x146a9f7fb700] DEBUG - Activity: updated activity 9102a5fe-0717-43ea-8299-bc98d4ceeb8c - completed 8.0% - Recording Aug 20, 2020 10:15:22.193 [0x146a9f7fb700] DEBUG - Activity: updated activity 10d9ddb5-d843-4536-b87e-b463c9e790da - completed 8.0% - Refreshing Sub Aug 20, 2020 10:15:23.173 [0x146a9edf6700] DEBUG - TranscodeSession: timed out waiting to find duration for live session Aug 20, 2020 10:15:23.173 [0x146a9edf6700] ERROR - Failed to start session. Aug 20, 2020 10:15:23.173 [0x146a9edf6700] DEBUG - Streaming Resource: Terminated session 0x146ae8017cd0:448b204b-89a9-4e7b-be07-a062a0cc606a with reason Recording failed. Please check your tuner or antenna. anyone else having an issue getting the channels to actually play through plex? Quote Link to comment
zerolim1t Posted August 27, 2020 Share Posted August 27, 2020 Hi guys got this connected and logged in but when i try to play something i get this.... 192.168.254.80 - - [27/Aug/2020 02:32:58] "GET /lineup_status.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:01] "GET /lineup.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:01] "GET /discover.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:01] "GET /lineup_status.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:03] "GET /lineup.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:03] "GET /discover.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:03] "GET /lineup_status.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:07] "GET /lineup.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:07] "GET /discover.json HTTP/1.0" 200 - 192.168.254.80 - - [27/Aug/2020 02:33:07] "GET /lineup_status.json HTTP/1.0" 200 - Quote Link to comment
Gbcue Posted August 29, 2020 Share Posted August 29, 2020 I followed Cynagen's instructions and have a paid Locast subscription, but for some reason, the Docker won't start, here are the logs: Locast2Plex v0.5.0 Tuner count set to 3 No UUID found. Generating one now... Traceback (most recent call last): File "/app/main.py", line 331, in <module> config_handler.set('main', 'uuid', DEVICE_UUID) File "/usr/lib/python2.7/ConfigParser.py", line 396, in set raise NoSectionError(section) ConfigParser.NoSectionError: No section: 'main' Locast2Plex v0.5.0 Tuner count set to 3 No UUID found. Generating one now... Traceback (most recent call last): File "/app/main.py", line 331, in <module> config_handler.set('main', 'uuid', DEVICE_UUID) File "/usr/lib/python2.7/ConfigParser.py", line 396, in set raise NoSectionError(section) ConfigParser.NoSectionError: No section: 'main' Any clue? Quote Link to comment
raujaku Posted August 29, 2020 Share Posted August 29, 2020 The container just updated to v5.0. You will need to create a config.ini file ( an example template is on the creators github) and you will need to map /app/config.ini to your created config.ini file to get it to work now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.