August 21, 20205 yr Hi All, I've had a couple issues with my array lately. In 3 weeks I've had Disk 4 go disabled and become not mountable (Replaced and rebuilt), Disk 1 XFS File corruption (repaired file system), and now yesterday Disk 1 is showing at Device Disabled. I could hear it spinning up, then spinning back down. I downloaded Diags, rebooted, and it sounds ok and passed a SMART test. Disk 1 is a pretty new disk. Seems like some gremlins? I'm buying new Sata Cables to try. Should I try a new Power Supply (curerntly a 700W from 2013). Is my motherboard taking a crap? These HW issues are driving me nuts lately Diag and Smart report attached To fix disk 1 I'm going to rebuild it onto a spare 12TB I have. Disable Array, replace disk 1 in array with spare 12TB, restart and repair array. I'll keep the original 12TB Disk 1 in case something bad happens during rebuild. nas4x12-smart-20200820-1953.zip nas4x12-diagnostics-20200819-2249.zip
August 21, 20205 yr Community Expert Do you have any spare ports? Try to use your intel ports and not the Marvell ports.
August 21, 20205 yr Author I do not have any spare ports. I have an PCIe card with 4 ports, but that is also marvel chip. Is there a PCI card with Intel, I will search. Maybe an LSI card? Also one other question, I'm currently doing a rebuild; can I pause the rebuild, power down, power up, and resume rebuild?
Archived
This topic is now archived and is closed to further replies.