tbonedude420 Posted August 21, 2020 Share Posted August 21, 2020 (edited) Hey unraiders! Trying to get my M2000 quadro working with emby, and having some issues it seems. I followed - https://forums.unraid.net/topic/77813-plugin-linuxserverio-unraid-nvidia/ - and had easy success with plex. Checking watch nvidia-smi from a terminal shows plex using it. Emby.... not so much...! Under Emby settings I expected to see my GPU listed as shown in the tutorial, but no dice. Any help greatly appreciated. TIA! Edit: Solved by updating to EmbyServerBeta (from Emby) Edited August 21, 2020 by tbonedude420 Quote Link to comment
HellDiverUK Posted August 21, 2020 Share Posted August 21, 2020 If you're using the linuxserver Emby install, it's exactly the same as Plex. Can confirm it works fine (I'm using a much shittier GTX1050 to good effect). Quote Link to comment
tbonedude420 Posted August 21, 2020 Author Share Posted August 21, 2020 1 minute ago, HellDiverUK said: If you're using the linuxserver Emby install, it's exactly the same as Plex. Can confirm it works fine (I'm using a much shittier GTX1050 to good effect). Glad to know others are having success (Rages inside!) bwahaha. I was hoping it was just as easy.... Maybe check over my config settings? Like you said, it was exactly the same I thought.... 🙄 Quote Link to comment
HellDiverUK Posted August 21, 2020 Share Posted August 21, 2020 Looks fine to me, did you remember to add the --runtime=nvidia variable in extra parameters? Quote Link to comment
tbonedude420 Posted August 21, 2020 Author Share Posted August 21, 2020 1 minute ago, HellDiverUK said: Looks fine to me, did you remember to add the --runtime=nvidia variable in extra parameters? I was hoping it was something that trivial... no dice The worrying part is I should see them listed as shown in the tutorial...(mine pictured above) has two blank spaces Can I console into Emby? ... (goes to test) Quote Link to comment
HellDiverUK Posted August 21, 2020 Share Posted August 21, 2020 (edited) I'd try the linuxserver version, rather than binhex. You should be able to use the same folder on your appdata if you've already everything else set up, just change the default to suit the folder present. Edited August 21, 2020 by HellDiverUK Quote Link to comment
tbonedude420 Posted August 21, 2020 Author Share Posted August 21, 2020 1 minute ago, HellDiverUK said: I'd try the linuxserver version, rather than bixhex. Good suggestion. Wanted to try the beta version anyway, so ill just test both and report back. My hope is its just not a supported GPU on the regular version, and it has been added in more recent updates/distros. On that note, Is there any commands I could/should type out to show more info? lspci only shows its passed to the container, not necessarily used. Quote Link to comment
Solution HellDiverUK Posted August 21, 2020 Solution Share Posted August 21, 2020 Just now, tbonedude420 said: Good suggestion. Wanted to try the beta version anyway, so ill just test both and report back. My hope is its just not a supported GPU on the regular version, and it has been added in more recent updates/distros. On that note, Is there any commands I could/should type out to show more info? lspci only shows its passed to the container, not necessarily used. To be honest, I don't know, because it's always just worked for me, both using nvidia and Intel Quicksync using the i915 driver. Hopefully someone else can help. 1 Quote Link to comment
tbonedude420 Posted August 21, 2020 Author Share Posted August 21, 2020 Emby beta confirmed working fine. I will edit the post to put solved. At least I know it does work. Thanks @HellDiverUK for the suggestion. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.