y2kindyz Posted August 22, 2020 Share Posted August 22, 2020 I know it’s probably harder and will require more work, but if i wanted to upgrade the motherboard on my current unraid server, Is it possible to swap motherboard s and reconfigure drives and presto it will work? i am currently running an intel Xeon 3060 @ 2.4Ghz and want to upgrade to a DZ68BC board with a faster processor. I know I am upgrading an old old board with a old one, but I am hoping it will be better. I have the pro version of unraid 6.8.3. I have 10 drives totaling 22TB of space. Mainly music and movies. Thanks for any help in advance, oscar Quote Link to comment
trurl Posted August 22, 2020 Share Posted August 22, 2020 2 minutes ago, y2kindyz said: Is it possible to swap motherboard s and reconfigure drives and presto it will work? yes. Assuming the controller presents the disks as before the drives should be recognized so nothing to reconfigure there. If you have any VMs using passthru might need to tweak those. Many of us have done this. Here is my recent rebuild thread: 1 Quote Link to comment
ChatNoir Posted August 22, 2020 Share Posted August 22, 2020 (edited) Never have done this myself, but from what I read on those forums you probably might even skip the reconfigure step. Everything important is on the USB key and identify disks with their S/N. The steps would be : backup flash drive config and appdata just in case power off remove old HW install new HW make sure every drive is well plugged in boot on the flash drive enjoy Damn, trurl was faster. Edited August 23, 2020 by ChatNoir typo 2 Quote Link to comment
y2kindyz Posted August 22, 2020 Author Share Posted August 22, 2020 Thanks guy will try. Fingers crossed. Quote Link to comment
isvein Posted August 22, 2020 Share Posted August 22, 2020 I have done it, and did it just like ChatNoir describes. As far as I know, Unraid uses the serials on the drives to identify them so what port they are connected to does not matter. Quote Link to comment
Fiservedpi Posted August 22, 2020 Share Posted August 22, 2020 (edited) Assuming no raid setups or anything exotic, it's really just that easy! Just make sure disk 1 gets assigned to where it was before in the UI and so on I just took a screenshot. I went from gigabyte A320M to Asus X370 last month with no issues whatsoever, I believe since everything is stored on the USB changing hardware is a breeze Edited August 22, 2020 by Fiservedpi Quote Link to comment
y2kindyz Posted January 24, 2021 Author Share Posted January 24, 2021 Hello guys, I finally got the courage to swap MotheBoard. But now after I swapped I am able to see login screen. And I type in root and and it works, but I am not able to see it remotely. The lights on the network connection do not light up. I tried to add a NIC card and it does not light up either. The ip address is set to 192.168.1.12. Is there any way to test network ? Thanks in advance, Oscar Quote Link to comment
itimpi Posted January 24, 2021 Share Posted January 24, 2021 If you post your system’s diagnostics zip file attached to your next post in this thread (so we can see what is going on) we might be able to give some informed feedback. You can penetrate this zip file either via Tools->Diagnostics in the GUI or via the ‘diagnostics’ command at the CLI. If using the CLI it is written to the ‘logs’ folder on the flash. Quote Link to comment
y2kindyz Posted January 24, 2021 Author Share Posted January 24, 2021 (edited) Itimpi, thanks for the reply. Now it seems I got bigger problems. When I 1st got everything going I would only get to the telnet screen. I would type root and I would get a IP and the unraid prompt. I thought it may be something with bios, so I got into the bios looking for a network setting that was possibly disabled. I only changed the boot sequence to have the USB be first and I also changed the setting on the power to restart after power was disconnected. Or something like that. Now when I tried to turn it on today. Nothing happens. When I press the power button I hear a clicking noise and there is a red light and blue skull that flashes as long as I keep pressing the power button. The fans com on but that is it. As soon as I release the power button nothing else happens. any ideas? Did I mess something up? thanks in advance, oscar Edited January 25, 2021 by y2kindyz Quote Link to comment
y2kindyz Posted January 25, 2021 Author Share Posted January 25, 2021 Ok I checked my power supply by jumping pins 4-5 and the PSU fan comes on an drives start to spin. So it seems that either the I screwed something up in the bios or the MB is bad. Is there anyway to set bios to default? thanks again, oscar Quote Link to comment
ChatNoir Posted January 25, 2021 Share Posted January 25, 2021 6 hours ago, y2kindyz said: Is there anyway to set bios to default? This should be covered in the MB manual : https://www.intel.com/content/dam/support/us/en/documents/motherboards/desktop/dz68bc/dz68bc_techprodspec08.pdf Quote Link to comment
y2kindyz Posted March 16, 2021 Author Share Posted March 16, 2021 Well I have not been able to reset the MB. What would be my least expensive motherboard I could use to replace and upgrade using same memory and cpu? Or is there an option to upgrade all for not too much cash. Ant help is appreciated oscar Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.