Hernaldo Posted August 25, 2020 Share Posted August 25, 2020 Hi, I build a nas server with unraid, my build is: 4x disk drives 1 tb 4x disk drives 2 tb 1x ssd 512 gb I created a share with the option "use cache"= prefer to my plex library, when i moving movies,series,etc... i saw all the writes goes to the cache disk, but when the cache disk drive was full, my copy task say "there is not enough space on the disk dont have space to continue". I thought when the cache is full, the system will be send the new data to the pool data but dont work that i spectated. Maybe is a setting that i need to activate or can some one explain well how the cache works. Thanks for your help. Best Regards Quote Link to comment
Gragorg Posted August 26, 2020 Share Posted August 26, 2020 All media should be in the array not be on your cache drive. Use cache should be set to "yes" for your media. This allows you to copy your movie, series etc over to the cache drive without slowing down for parity. When "mover" is run it will copy the media into the array at a later time. Split level of your shares may be what is preventing the data from pushing over into the array. Quote Link to comment
JorgeB Posted August 26, 2020 Share Posted August 26, 2020 9 hours ago, Hernaldo said: . I thought when the cache is full, the system will be send the new data to the pool data It does, if the minimum free space setting is correctly set for that share. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.