August 30, 20205 yr Hi all, I've gone through the process of installing Unraid to a USB drive and once I insert it into the server chassis it is booting into Unraid without issues. It stops at the login prompt with the tower name which I gave it (Junkbox). This is the default boot option and not GUI mode. Now I am able to connect to my server via the IP address (gives me the Supermicro IPMI web GUI), but I can't connect to the Unraid web GUI via the tower name (http://Junkbox). When I booted the server up it says IPv4 address: not set. I've attached the diagnostics file. Any help is appreciated. Thanks junkbox-diagnostics-20200830-1808.zip
August 30, 20205 yr Author Thanks for the suggestion. I just tried this and am encountering the same issue. I ran a new diagnostics file which I've attached. junkbox-diagnostics-20200830-2016.zip
August 30, 20205 yr Community Expert 1 hour ago, BlueRacoon said: I am able to connect to my server via the IP address (gives me the Supermicro IPMI web GUI) This suggests you are connecting to an ethernet port reserved for this purpose. Do you have another port for Unraid to use?
August 30, 20205 yr Community Expert Just now, trurl said: This suggests you are connecting to an ethernet port reserved for this purpose. Do you have another port for Unraid to use? And your diagnostics confirm that Unraid has no ethernet connection and no IP address.
August 30, 20205 yr Author That was exactly the issue, thank you! I'm pretty new to this home lab thing and didn't realize the IPMI is dedicated in that manner. Now I can continue with my setup! I was able to login using the IP address which appeared before the login prompt. Edited August 30, 20205 yr by BlueRacoon
Archived
This topic is now archived and is closed to further replies.