Unable to properly mount array

[BenjaminMetzler]

Hi All,

I'm running into an issue.  If I start my array, it comes up but it doesn't appear to be correctly mounted.  The individual drives (/mnt/disk*) show the data, but the array (/mnt/user) doesn't show the array contents.  I've attached the diagnostics, so any help is appreciated.

 

Thanks,
Ben

scooby-diagnostics-20200904-1942.zip

[trurl]

What do you get from the command line with this?

ls -lah /mnt

 

[BenjaminMetzler]

root@Scooby:/mnt/user# ls -lah /mnt
total 24K
drwxr-xr-x  9 root   root   180 Sep  4 19:37 ./
drwxr-xr-x 19 root   root   400 Sep  4 19:43 ../
drwxrwxrwx  1 nobody users  102 Sep  4 19:47 cache/
drwxrwxrwx 21 nobody users 4.0K Sep  4 19:47 disk1/
drwxrwxrwx 19 nobody users 4.0K Sep  4 19:47 disk2/
drwxrwxrwx  9 nobody users  145 Sep  4 19:47 disk3/
drwxrwxrwx 11 nobody users  181 Sep  4 19:47 disk4/
drwxrwxrwt  2 nobody users   40 Sep  4 19:52 disks/
drwxr-xr-x  3 root   root    60 Sep  4 19:00 user/

 

[trurl]

This is wrong

29 minutes ago, BenjaminMetzler said:

drwxr-xr-x 3 root root 60 Sep 4 19:00 user/

Any idea how it got that way?

 

Should be

drwxrwxrwx  1 nobody users  16 Sep  4 04:40 user/

I know there was similar thread in the not too distant past but having a little trouble searching for it.

 

Are you trying to do this?

 

[BenjaminMetzler]

 I've haven't been doing anything with the permissions.  I tend to leave the system alone as it's the DVR for the house and I don't want to tick off the family.  The only major change recently was a month ago when I enabled encryption on the drives (I did check the password was correct).   I did have a power failure the other day but everything came up when I powered on. 

 

That said, I just brought the array up and everything is working.  I hadn't done anything to the system since my last message other then bring the array down.  I had tried both rebooting and mounting the array multiple times before posting my first message so I'm not sure what else would have changed.

 

Permission all look correct now and the array is as expected.

root@Scooby:/mnt# ls -l
total 44
drwxrwxrwx  1 nobody users  102 Sep  4 19:47 cache/
drwxrwxrwx 21 nobody users 4096 Sep  4 19:47 disk1/
drwxrwxrwx 19 nobody users 4096 Sep  4 19:47 disk2/
drwxrwxrwx  9 nobody users  145 Sep  4 19:47 disk3/
drwxrwxrwx 11 nobody users  181 Sep  4 19:47 disk4/
drwxrwxrwt  3 nobody users   60 Sep  4 22:14 disks/
drwxrwxrwx  1 nobody users  102 Sep  4 19:47 user/
drwxrwxrwx  1 nobody users 4096 Sep  4 19:47 user0/

Curiouser and curiouser.

[JorgeB]

You have a lot (all?) nerdpack options installed, install just the ones you need, some util might be overtiring/conflicting with Unraid, and if it still happens again try booting in safe mode.

[trurl]

9 hours ago, JorgeB said:

You have a lot (all?) nerdpack options installed, install just the ones you need, some util might be overtiring/conflicting with Unraid, and if it still happens again try booting in safe mode.

Missed that. @BenjaminMetzler don't install a lot of stuff you aren't using and may not even know what it is.

[BenjaminMetzler]

Forgot about those.  It's been a while since I installed nerdpack.  I'll remove the ones I don't need.

 

Ben