September 6, 20205 yr Hi, For some strange reason as soon as I turn Sabnzb (linuxserver version) on it shuts the internet down. It has been setup the same way for a long time. Own ip address - connected to Nordvpn. Still does it with Nordvpn off. It is acting like a firewall is kicking in but not seeing any blockage for it. Have a ASUS Router RT-Ac5300 on Merlin Firmware - Firmware is up to date. In the router logs I found this. I know it's related to Nord, not sure fully what it means. Sep 6 01:57:04 ovpn-client1[17461]: TLS: tls_process: killed expiring key Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=2, C=PA, O=NordVPN, CN=NordVPN Root CA Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=1, C=PA, O=NordVPN, CN=NordVPN CA5 Sep 6 01:57:04 ovpn-client1[17461]: VERIFY KU OK Sep 6 01:57:04 ovpn-client1[17461]: Validating certificate extended key usage Sep 6 01:57:04 ovpn-client1[17461]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Sep 6 01:57:04 ovpn-client1[17461]: VERIFY EKU OK Sep 6 01:57:04 ovpn-client1[17461]: VERIFY OK: depth=0, CN=ca1014.nordvpn.com Sep 6 01:57:05 ovpn-client1[17461]: Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sep 6 01:57:05 ovpn-client1[17461]: Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key Sep 6 01:57:05 ovpn-client1[17461]: Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(420): eth3: Auth 30:FD:38:C9:BB:32, status: 0, reason: d11 RC reserved (0) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(430): eth3: ReAssoc 30:FD:38:C9:BB:32, status: 0, reason: d11 RC reserved (0) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(401): eth2: Disassoc 30:FD:38:C9:BB:32, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8) Sep 6 01:57:26 syslog: WLCEVENTD wlceventd_proc_event(401): eth2: Disassoc 30:FD:38:C9:BB:32, status: 0, reason: Disassociated because sending station is leaving (or has left) BSS (8) Any ideas? Thanks
September 13, 20205 yr Community Expert 13 minutes ago, Badboy said: Solved Might be useful to other users if you would share your solution.
September 21, 20205 yr Author On 9/12/2020 at 10:18 PM, trurl said: Might be useful to other users if you would share your solution. Sorry, switched to Nzbget and solved the issue. Not sure exactly what broke Sab.
Archived
This topic is now archived and is closed to further replies.