I connect to unraid remotely through WireGuard.  When I have containers routed through delugevpn to private internet access I can access them on the Lan but not remotely when connecting through WireGuard.  It’s only containers that are going through deluge.  Any idea on what I need to change to be able to connect to those containers when outside the Lan?

Edited September 14, 20205 yr by Ericjr

Perhaps reading from here on down might help

 

https://forums.unraid.net/topic/84229-dynamix-wireguard-vpn/?tab=comments#comment-780658

 

Squid,

Thank you for the reply. I created a static route in my netgear router but I still am unable to connect to those containers. 

Screenshot attached of my router configuration.

 

The Unraid machine's ip on the lan is the 10.0.1.20 I think I have everything else right though. I tried checking and unchecking the private box.

Edited September 10, 20205 yr by Ericjr

I am by no means a network guru, but I *think* you have the subnet mask wrong.  Anyway, I had a netgear router that i could never get it to route across two networks.  I eventually gave up with that trash and switched to unifi. Best move I ever made!

From the posts I saw from others in squids suggestion that was the subnet being used by the people that had it working.  I would love to switch to ubiquity but I just dropped my fun money on this build and a pile of hard drives so it’s what I have to work with right now. If you have any ideas please let me know.  
 

I can route across networks just fine.  It’s only the containers I run through deluge that I can’t access outside the Lan.  

Edited September 10, 20205 yr by Ericjr

I changed the subnet to 255.255.255.0 and insured that use nat was set to off.  

 

I’ve read through the threads. I’m not sure where I’m going wrong.  

Edited September 12, 20205 yr by Ericjr

I finally figured it out. It wasnt an issue with my router or docker networking. My issue was with deluge. I added the wireguard lan (10.253.0.0/24) under 

Container Variable: LAN_NETWORK and it all works now.

On 9/14/2020 at 3:57 AM, Ericjr said:

I finally figured it out. It wasnt an issue with my router or docker networking. My issue was with deluge. I added the wireguard lan (10.253.0.0/24) under 

Container Variable: LAN_NETWORK and it all works now.

THANK YOU KIND HUMAN! Created an account just to post this. I’ve been having this problem for a while now, and actually solved it temporarily by adding a raspberry pi with a vpn server (pivpn) to my network just so I could access the dockers behind vpn, as a could not for the life of me figure out why I couldn’t get this to work through my Unraid VPN server… This solved it all for me, thank you sir! 

Edited November 21, 20214 yr by Henke
Bad language, unclear content.

On 9/14/2020 at 11:57 AM, Ericjr said:

I finally figured it out. It wasnt an issue with my router or docker networking. My issue was with deluge. I added the wireguard lan (10.253.0.0/24) under 

Container Variable: LAN_NETWORK and it all works now.

Just to add my 2 cents, after messing around with setting different DNS and static routes on my router and whatever misdirects google threw at me, I came across this thread.

I added a second variable of LAN_NETWORK  with the value of 10.253.0.0/24 and I was able to access containers over the VPN but I couldn't access them from the LAN anymore.

I'm sure it was clear to others but anyone else who comes across this, I had to append it to my existing LAN_NETWORK variable separated by a comma...

So, it went- LAN_NETWORK = 192.168.1.0/24,10.253.0.0/24

Wow, also was lucky enough to stumble upon this thread after messing around with trying to get access to dockers being tunneled through a vpn container and following the quickstart topic to a T.  Adjusting the LAN_NETWORK variable per the above post did the trick.  Just to add a tiny bit more info:  If you're using an Edgemax router (or have a "distance" variable on your router for static routes) having a distance of "1" set per the wireguard quickstart topic seems to only allow me to access the VPN container (in my case, qBittorrent).  If you change the distance to 2 you can access containers that are being tunneled through that container.